Zum Hauptinhalt wechseln

Synchronisationsprobleme am linken Joy-Con lösen

Was du brauchst

Videoanleitungen

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.

11 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Taylor Dixon

Mitglied seit: 06/26/18

66.782 Reputation

94 Anleitungen geschrieben

9 Kommentare

Where can i find conductive foam? I don’t understand “can often be found in old packaging around the house”. What kind of packaging?

Vishvan Bhairosingh - Antwort

Hey Vishvan! A lot of electronics are packaged with conductive foam, so there’s a good chance you might have some around the house if you are the kind of person who keeps boxes from electronics you have purchased in the past. You can test any foam you find with a capacitive touchscreen (like the one on your Nintendo Switch)—if the foam registers as a touch on the screen, it is conductive.

It’s nice if you can recycle some from old packaging, because it can be tricky to find online in small quantities. It generally comes in (relatively) big blocks or sheets and you only need a tiny piece.

If you cant find any around the house, eBay is a good place to start looking!

https://www.ebay.com/sch/i.html?_from=R4...

Taylor Dixon -

What thickness of conductive foam should I choose? There are 3 sizes: 3mm/0.12, 5mm/0.20", 10mm/0.39"

maximaleks - Antwort

The space is ~9 mm wide, so I would go with the 10 mm size and you can trim it down if you need to!

Taylor Dixon -

I've got the same problem but with the right joycon but I don't know where the wireless card is, please help

Nathan Currie - Antwort

Hello I opened up my left joycon and saw conductive foam inside already! I replaced it with one that I bought on amazon (I made sure it was actually conductive foam). But it still won’t sync. Any ideas? Could it be that little solder bubble that connects to the antenna has gone bad? Should I try to reflow it? I also checked to see if any capacitors in the top of the board were shorted and none of them were. If you have any ideas I would be happy to hear!

Chaim Bendahan - Antwort

I opened my left Joycon and found that there is no antenna area near the joystick compartment. It’s just an empty space what should I do, I have the conductive foam but obviously don’t know where to place.

Omar Gonzalez - Antwort

Hi I have the white ones that came with the switch oled, I followed the instructions but the antenna isn't where it is in the video.

Nathan gustafson - Antwort

This video only covers original left Joycon sync issue. For v2 joycons there should be a different video as it is a different motherboard.

Matthew Ward - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 13

Letzte 7 Tage: 116

Letzte 30 Tage: 457

Insgesamt: 34,863