Einleitung
If your Baby Lock Joy sewing machine isn't producing even stitches or is bunching up the fabric, use this guide to remove a take-up lever thread jam.
The Baby Lock Joy sewing machine creates stitches by moving the thread through the take-up lever. A thread jam in the take-up lever will cause uneven stitching and bunching of the fabric.
Was du brauchst
-
-
Turn off the sewing machine.
-
-
-
-
Grab the tail of the sewing thread with tweezers.
-
-
-
Turn the hand wheel in the opposite direction of the thread so the thread can become untangled.
-
-
-
Continue to pull the thread away from the take-up lever until the entire thread comes out.
-
To reassemble your device, follow steps two and three in reverse order.
To reassemble your device, follow steps two and three in reverse order.
Team
California State University Bakersfield, Team 74-1, Chiang Fall 2023 Mitglied von California State University Bakersfield, Team 74-1, Chiang Fall 2023
CSUB-CHIANG-F23S74G1
2 Mitglieder
1 Anleitung geschrieben
