Einleitung
This guide will thoroughly explain how to easily repair a zipper that is broken. No special requirements needed; just needle-nose pliers, scissors, and a needle and thread!
Was du brauchst
-
-
Take the needle nose pliers and remove the metal or plastic stopper at the end of the zipper.
-
Zip the zipper all the way down to the last set of teeth.
-
-
-
-
Thread the needle.
-
Sew up the area where the metal or plastic stopper used to reside.
-
-
-
Take the scissors and cut off the excess thread. Get as close to the knot as you can without cutting it off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
10 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Arkansas State University, Team S1-G11, Chamberlain Summer 2017 Mitglied von Arkansas State University, Team S1-G11, Chamberlain Summer 2017
ARSU-CHAMBERLAIN-SU17S1G11
1 Mitglied
1 Anleitung geschrieben
Ein Kommentar
Not helpful. Suppose if the slider part broke and is now now. Now what?
