Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

This Fast Fix can be used to patch a crack in any hollow wood door. The materials that will need to be purchased include body/wood filler, sandpaper/sanding sponge, paint, putty knife, and a paint brush. To prevent any hazards, gloves and a face mask are recommended. Overall, this Fast fix should take no longer than an hour to complete and should not cost over $10 when purchasing the required materials.

  1. Clean and dust the affected area with a paper towel, rag, or brush. Clean and dust the affected area with a paper towel, rag, or brush.
    • Clean and dust the affected area with a paper towel, rag, or brush.

  2. Sand the affected area with a 60/80 grit sanding sponge.
    • Sand the affected area with a 60/80 grit sanding sponge.

    • Any type of sand paper or sanding sponge will work on wood surfaces.

    • It is recommended to place newspaper under the door to keep the sand/dust contained.

  3. Remove any sand/dust with a paper towel.
    • Remove any sand/dust with a paper towel.

    • It is recommend to use gloves to prevent any minor splinters.

    • It is also recommended to use a face mask to prevent inhaling any dust/sand.

  4. iPhone LCD Display Fix Kits

    Die Budgetoption, abgedeckt durch unsere lebenslange Garantie.

    Kits kaufen

    iPhone LCD Display Fix Kits

    Reduziere die Reparaturkosten, nicht die Qualität.

    Kits kaufen
  5. Use putty knife to apply body filler until an even layer is formed.
    • Use putty knife to apply body filler until an even layer is formed.

    • Start with a small amount and then add more if needed.

    • A smaller putty knife allows for easier application in creases and folds.

  6. Remove any excess body filler with putty knife
    • Remove any excess body filler with putty knife

    • Its okay if the surface is uneven, you will use sandpaper to smooth the surface in a later step.

  7. Allow to dry (or use a blow dryer for lesser wait time).
    • Allow to dry (or use a blow dryer for lesser wait time).

    • More expensive brands of body filler will dry faster.

  8. Gently sand the surface. Gloves and a face mask are highly recommended but not required for this step.
    • Gently sand the surface.

    • Gloves and a face mask are highly recommended but not required for this step.

    • Newspaper is also recommended to contain any sand/dust.

    • Reapply body filler, allow to dry, and re-sand if surface remains uneven.

  9. Use a similar toned paint to paint the area if any discoloration exists.
    • Use a similar toned paint to paint the area if any discoloration exists.

    • Wood paint is ideal for wood doors.

  10. Allow to dry.
    • Allow to dry.

    • Your door should now look neutral and clean.

    • A blow dryer is recommended for faster drying.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Lea Thomas

Mitglied seit: 20.01.2019

169 Reputation

1 Anleitung geschrieben

Team

USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019 Mitglied von USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019

USFSM-STEWART-S19S1G1

18 Mitglieder

13 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 58

Letzten 7 Tage: 499

Letzten 30 Tage: 1,999

Insgesamt: 8,842