Repariere deine Sachen Community Store

How to Fix a Crack in a Hollow Wood Door

Einleitung

This Fast Fix can be used to patch a crack in any hollow wood door. The materials that will need to be purchased include body/wood filler, sandpaper/sanding sponge, paint, putty knife, and a paint brush. To prevent any hazards, gloves and a face mask are recommended. Overall, this Fast fix should take no longer than an hour to complete and should not cost over $10 when purchasing the required materials.

Was du brauchst

  1. How to Fix a Crack in a Hollow Wood Door, How to Fix a Crack in a Hollow Wood Door: Schritt 1, Bild 1 von 2 How to Fix a Crack in a Hollow Wood Door, How to Fix a Crack in a Hollow Wood Door: Schritt 1, Bild 2 von 2

    • Clean and dust the affected area with a paper towel, rag, or brush.

    Übersetzen

  2. How to Fix a Crack in a Hollow Wood Door: Schritt 2, Bild 1 von 1

    • Sand the affected area with a 60/80 grit sanding sponge.

    • Any type of sand paper or sanding sponge will work on wood surfaces.

    • It is recommended to place newspaper under the door to keep the sand/dust contained.

    Übersetzen

  3. How to Fix a Crack in a Hollow Wood Door: Schritt 3, Bild 1 von 1

    • Remove any sand/dust with a paper towel.

    • It is recommend to use gloves to prevent any minor splinters.

    • It is also recommended to use a face mask to prevent inhaling any dust/sand.

    Übersetzen

  5. How to Fix a Crack in a Hollow Wood Door: Schritt 4, Bild 1 von 1

    • Use putty knife to apply body filler until an even layer is formed.

    • Start with a small amount and then add more if needed.

    • A smaller putty knife allows for easier application in creases and folds.

    Übersetzen

  6. How to Fix a Crack in a Hollow Wood Door: Schritt 5, Bild 1 von 1

    • Remove any excess body filler with putty knife

    • Its okay if the surface is uneven, you will use sandpaper to smooth the surface in a later step.

    Übersetzen

  7. How to Fix a Crack in a Hollow Wood Door: Schritt 6, Bild 1 von 1

    • Allow to dry (or use a blow dryer for lesser wait time).

    • More expensive brands of body filler will dry faster.

    Übersetzen

  8. How to Fix a Crack in a Hollow Wood Door: Schritt 7, Bild 1 von 2 How to Fix a Crack in a Hollow Wood Door: Schritt 7, Bild 2 von 2

    • Gently sand the surface.

    • Gloves and a face mask are highly recommended but not required for this step.

    • Newspaper is also recommended to contain any sand/dust.

    • Reapply body filler, allow to dry, and re-sand if surface remains uneven.

    Übersetzen

  9. How to Fix a Crack in a Hollow Wood Door: Schritt 8, Bild 1 von 1

    • Use a similar toned paint to paint the area if any discoloration exists.

    • Wood paint is ideal for wood doors.

    Übersetzen

  10. How to Fix a Crack in a Hollow Wood Door: Schritt 9, Bild 1 von 1

    • Allow to dry.

    • Your door should now look neutral and clean.

    • A blow dryer is recommended for faster drying.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

Lea Thomas

Mitglied seit: 01/20/19

250 Reputation

1 Anleitung geschrieben

Auszeichnungen: 8

+ 5 weitere Auszeichnungen

Team

USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019 Mitglied von USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2019

USFSM-STEWART-S19S1G1

18 Mitglieder

27 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 73

Letzte 7 Tage: 488

Letzte 30 Tage: 2,173

Insgesamt: 130,792