Einleitung
Do you have a desk drawer that just won't line up correctly? Follow the simple steps in this guide to correctly line up your drawer and make your life just a little bit easier.
The specific screwdrivers and screws used in this guide may not be the same used in other desk drawers. If you have any questions I recommend going to your local hardware store.
Was du brauchst
-
-
-
Start by pulling the drawer out and detaching it from the hardware mounted to the desk.
-
To do this you need to push the black plastic lever up in order to disengage the drawer's hardware from the desk's hardware.
Frag FixBot
-
-
-
In this case the hardware on the left side of the drawer is not functioning properly due to a bent metal piece.
-
Using the flat head screwdriver you can push the metal down around each ball bearing in order to allow the drawer to slide back and forth.
-
-
-
-
The hardware attached to the drawer is also not functioning properly due to missing screws.
-
Use replacement screws to properly attach the hardware to the drawer and to allow it to support the drawer's weight.
-
-
-
After attaching the hardware slide the drawer's piece into its counterpart on the desk.
-
-
To reassemble your device, follow these instructions in reverse order.
