Einleitung
If you're tired of your halogen headlights or fog lights and want to upgrade to something with a better output, try installing an HID Conversion Kit.
Was du brauchst
-
-
-
Open the hood.
-
Locate the back of the headlights and remove the bolts holding the headlight housing.
Frag FixBot
-
-
-
Remove battery negative terminal.
-
Remove headlight cover and remove factory halogen bulb.
-
-
-
-
Take out the HID bulb from the plastic shell and remove the circular plastic piece.
-
Remember not to touch the HID bulb glass!
-
If you accidentally touch it, you can clean it with some rubbing alcohol.
-
-
-
Screw in the HID bulb back into the headlight housing.
-
Connect the wires of the HID bulb to the ballast and then connect the HID ballast back to the stock harness.
-
-
-
Before you mount the ballast, test the HID light to make sure it lights up.
-
If not, turn the adapter wire 180 degrees.
-
Mount the HID ballast with zip ties.
-
-
Enjoy your new HID Conversion Kit and upgraded headlights or fog lights.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Personen haben diese Anleitung absolviert.
