Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
To remove the speaker from the cabinet, unscrew the 4 screws being careful not to slip and pierce the paper cone.
-
Once the screws are removed gently pull the speaker out of the cabinet.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Here is the speaker removed from the cabinet, you can clearly see the degraded state of the foam surround. Luckily this makes it very easy to remove it.
-
These next steps require careful attention to detail. Work slowly and carefully. You do not want to puncture/tear/rip the paper cone or any other components.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove the black foam ring.
-
Carefully run your knife between the ring and the outer metal edge.
-
Now using your hands and knife when needed remove the black ring from the speaker frame. Prying slowly. Take care not to tear it.
-
Once the ring is removed rub all of the old foam surround off and set aside for reassembly
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove all of the old foam surround from the cone and speaker frame. It was so crumbly on mine that all it took was a bunch of rubbing with my fingers. If you are having trouble use your knife, but again be careful.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
You can see some of the glue seeped out, it will dry clear so don't worry.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Spread glue on the ring you removed earlier
-
place over the foam ring and press on securly
-
allow everything over night to dry completely.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Connect the wires to the speaker being mindfull of the polarity.
-
Gently fit the speaker into the housing
-
Line up the screws and progressively tighten them until the speaker is secured
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.