Einleitung
Repairing a rip in vinyl furniture is a short, simple, and low-cost fit that can be accomplished in the home. Vinyl furniture can rip for a number of reasons, such as a sharp object or a pet scratching the material. It is best to repair a tear as soon as possible to avoid the tear becoming larger.
Was du brauchst
-
-
-
Clean the damaged area with rubbing alcohol, using a rag, paper towel, or Q-tip.
Frag FixBot
-
-
-
Cut the backing fabric large enough to cover the tear, approximately half an inch larger around the tear.
-
-
-
-
Use the spatula tool to insert the backing fabric underneath the tear.
-
-
-
Let the adhesive dry for approximately four hours.
-
You may use a hair dryer to speed up the drying process.
-
-
-
Use a Q-tip dipped in rubbing alcohol to buff and blend the area.
-
Apply light pressure to even out the edges.
-
-
Once the adhesive is dry, the furniture is ready for use!
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Personen haben diese Anleitung absolviert.
Team
University of Minnesota, Team S1-G4, Card Fall 2018 Mitglied von University of Minnesota, Team S1-G4, Card Fall 2018
UMN-CARD-F18S1G4
3 Mitglieder
1 Anleitung geschrieben
