Einleitung
Follow this guide to remove the stock stereo head unit from the dash of Toyota Tacoma’s originating after 2016. This procedure includes the removal of the stereo from the dash of the vehicle and does not include information on installing an aftermarket unit.
Was du brauchst
-
-
Unscrew the four bolts on the sides of the stereo using a 10 mm socket with a ratchet or an impact driver.
-
-
-
-
Carefully remove the stereo out of the dash to expose the wires in the back of the unit.
-
-
-
Remove all 9 wires from the back of the stereo by pushing down the safety clips and set the unit aside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
