How to Remove and Replace Caulk in a Bathtub

Einleitung

The procedure being performed is the replacement of the caulk around the bathtub. The process first starts with the removal of the caulk and cleaning of access caulk. It is supposed to dry overnight to prevent molding of the walls. Be careful with the caulk remover as it is dangerous if it gets in the eyes or mouth.

The process of loading the caulk gun is as followed:

Puncture it by sticking the metal rod alongside the caulk gun into the head of the new caulk
Cut the tip of the new caulk with the cutter that is inside of the caulk gun handle, and make sure to cut it at the label with the desired width you want to caulk.
Let the pump part of the caulk gun be back as far as possible so the caulk is able to fit into the gun
Once it’s in place just pull the trigger until there is enough pressure for the caulk to come out

Was du brauchst

Schritt 1 Replacing Caulk in Bathtub

How to Remove and Replace Caulk in a Bathtub, Replacing Caulk in Bathtub: Schritt 1, Bild 1 von 1

Remove current caulk from bathtub using a sharp tool such as a knife or utility tool. Test it first in a small area to not scrape the bathtub.

Bearbeiten

Schritt 2

Clean the surface and mold from the area with a putty knife. Excess caulk can be removed with a combination of liquid caulk removal. Remove the rest of the residue with a knife.

Bearbeiten

Schritt 3

Dry the area well to prevent mold from forming and it let it dry overnight before continuing the next step.

Bearbeiten

Schritt 4

Tape around the area that is going to be caulked. Place the tape 1/8 inch on either side of the seam that is going to be caulked. The tape keeps the caulk in a smooth line.

Bearbeiten

Schritt 5

Trim the opening of the caulk from the caulk gun to 1/8 an inch and use it a 45-degree angle and make sure it is the same size as the area between the tape.

Bearbeiten

Schritt 6

Load the caulk gun and use a steady pressure along the space between the tape as you move across it. An even pace is needed; if it’s too slow the caulk will pile up, and if it’s too fast it will break easily.

Bearbeiten

Schritt 7

Smooth out the line of caulk with your finger.

Bearbeiten

Schritt 8

Remove tape and fix any blemishes.

Bearbeiten

Abschluss

If you are how unhappy how the caulk turned out; don’t worry you can just do the following the steps again as there is no permanent damage done with caulking.