How to Replace Underside Fabric of a Chair

Gemeinsam reparieren - Jetzt registrieren

Einleitung

A common problem with any armchair or sofa is that the underside upholstery fabric can begin to rip, sag, or come off entirely. This guide will provide easy instructions on how to repair the fabric in 15-20 minutes and avoid the costs of replacing the chair altogether.

Was du brauchst

1. Schritt 1 Underside Fabric
  Turn the armchair on its back.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
2. Schritt 2
  Use pliers to remove the staples from the chair frame.
  
  If the staples are too difficult to remove, cut away the fabric with scissors.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
3. Schritt 3
  Measure out the dimensions of the perimeter of the chair frame.
  
  Add an extra inch to each side to allow for error.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
5. Schritt 4
  Trace the dimensions onto the new fabric.
  
  Cut along the traced lines.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
6. Schritt 5
  Fold under approximately a 1-inch allowance from the fabric’s edges.
  
  Adjust the folded edges as needed to the correct size.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
7. Schritt 6
  Use a staple gun to staple the fabric to the chair frame starting at one corner.
  
  If the staples do not go all the way into the chair frame, tap lightly with a hammer.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024
8. Schritt 7
  Sit the chair upright and make sure the fabric is not visible or sagging.
  
  If the fabric is visible, remove the staples from the closest corner and pull taut.
  Bearbeiten
  
  Frag FixBot
  
  Kommentar hinzufügen
  
  1024