Zum Hauptinhalt wechseln

Werkzeuge

Ersatzteile

Keine Ersatzteile angegeben.

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    Fit the wheel into the wheel truing stand. The wheel should be snug and securely fixed to the stand.
    • Fit the wheel into the wheel truing stand.

    • The wheel should be snug and securely fixed to the stand.

    • Make sure hub does not have play in it since this will impede your ability to true the wheel.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    Slowly rotate the wheel. Slowly tighten the calipers until they touch at some point on only one side of the rim.
    • Slowly rotate the wheel.

    • Slowly tighten the calipers until they touch at some point on only one side of the rim.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    Select the a spoke wrench that fits the spokes on your wheel. Loosen the spokes that attach to the same side of the wheel as the caliper contact point. At the same time, tighten the spokes that attach to the opposite side of the wheel as the caliper contact point. To start, try a half turn for each of the spokes near the caliper contact point.
    • Select the a spoke wrench that fits the spokes on your wheel.

    • Loosen the spokes that attach to the same side of the wheel as the caliper contact point. At the same time, tighten the spokes that attach to the opposite side of the wheel as the caliper contact point. To start, try a half turn for each of the spokes near the caliper contact point.

    • In the photo, the red marked spokes are being tightened, and the blue marked spokes are being loosened. This will shift the rim closer to the viewer.

    • Spin the wheel. Tighten the calipers again until they touch the rim on only one side at a time at certain point. Repeat steps 2-3 until when tightening the calipers, they touch both sides of the rim evenly at every point on the rim.

Ziellinie

Ein weiterer Nutzer hat diese Anleitung absolviert.

aaron thielk

Mitglied seit: 10.10.2010

1.864 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-13, Maness Fall 2010 Mitglied von Cal Poly, Team 5-13, Maness Fall 2010

CPSU-MANESS-F10S5G13

4 Mitglieder

17 Anleitungen geschrieben

2 Kommentare

This is a great instruction manual. I especially appreciated the pictures. For those of us who have never fixed a bike, I would not know what a caliper was without the picture.

Thanks!

edwardslaura234 - Antwort

If you don't want to spend money on wheel callipers. Use clothes hanger and tape to the break as a guide.

deankjm - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 2

Letzten 30 Tage: 9

Insgesamt: 6,963