Einleitung

Checking the battery is fairly easy, all you will need is a multimeter, which can be purchased at a local hardware store.

Slide the battery cover up and off the phone. Slide the battery cover up and off the phone.
  • Slide the battery cover up and off the phone.

Kommentar hinzufügen

Pop the battery out of its slot by lifting it up. Pop the battery out of its slot by lifting it up.
  • Pop the battery out of its slot by lifting it up.

Kommentar hinzufügen

Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV. Turn the multimeter on.
  • Plug the red probe into the center jack, the black probe into the bottom jack, and turn the range selector switch to 20 DCV.

    • Turn the multimeter on.

Kommentar hinzufügen

Touch the red probe to the indicated positive side and the black probe to the indicated negative side.
  • Touch the red probe to the indicated positive side and the black probe to the indicated negative side.

    • Replace the battery if the voltage reads below 2.5 volts.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ryan Waltman

Mitglied seit 14.01.2011

111 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 14-10, Forte Winter 2011 Mitglied von Cal Poly, Team 14-10, Forte Winter 2011

CPSU-FORTE-W11S14G10

5 Mitglieder

15 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 19

Insgesamt: 4,699