Einleitung

If sand, dirt or liquid has penetrated the outside covers of the camera, the function buttons might stick or cease to register. This guide shows you how to open the camera and clean the function keys.

Unscrew  a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver. There are 2 screws on the left side (when looking at the front of the camera). There are 3 screws on the bottom
  • Unscrew a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver.

  • There are 2 screws on the left side (when looking at the front of the camera).

  • There are 3 screws on the bottom

  • There is 1 screw on the right side

Kommentar hinzufügen

Turn to the bottom of the camera.
  • Turn to the bottom of the camera.

  • Open the memory card cover by sliding the "CARD/BATT." button up, and then pulling the cover to the left.

Kommentar hinzufügen

This is what the SD card/battery compartment looks like when opened.
  • This is what the SD card/battery compartment looks like when opened.

  • Remove one 4.45mm phillips head screw from the SD card/battery compartment using a #00 phillips head screwdriver.

Kommentar hinzufügen

Gently remove the front cover away from the camera body. Tip: Start by loosening the teeth on the left side of the camera next to the battery compartment.
  • Gently remove the front cover away from the camera body.

  • Tip: Start by loosening the teeth on the left side of the camera next to the battery compartment.

Kommentar hinzufügen

The camera should look like this once the front cover is removed.
  • The camera should look like this once the front cover is removed.

Kommentar hinzufügen

Start from the battery compartment and remove the back cover. Caution: Do not tug on the back cover after it is removed. This could tear the ribbon attaching the back cover to the camera body. Remove the connecting ribbon from the body of the camera using a pair of tweezers.
  • Start from the battery compartment and remove the back cover.

  • Caution: Do not tug on the back cover after it is removed. This could tear the ribbon attaching the back cover to the camera body.

  • Remove the connecting ribbon from the body of the camera using a pair of tweezers.

Kommentar hinzufügen

Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.
  • Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.

Kommentar hinzufügen

Turn to the back of the camera body. Rub the function keys and surrounding area with a clean cloth dipped in isopropyl alcohol.
  • Turn to the back of the camera body. Rub the function keys and surrounding area with a clean cloth dipped in isopropyl alcohol.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Shaelyn Thomas

Mitglied seit 19.04.2011

287 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 8-6, Regan Spring 2011 Mitglied von Cal Poly, Team 8-6, Regan Spring 2011

CPSU-REGAN-S11S8G6

4 Mitglieder

8 Anleitungen geschrieben

new Battery in side & massages is Battery low why?

Rupesh Jamsandekar - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 1,543