Einleitung

This guide will walk you through taking apart the mouse and repairing the left and right mouse buttons.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Unplug the USB cord to disconnect the mouse from power.
    • Unplug the USB cord to disconnect the mouse from power.

    • On the bottom side of the mouse, unscrew the single screw located above the rotating ball.

  2. Take off the top of the mouse and remove any debris located inside of the highlighted areas.
    • Take off the top of the mouse and remove any debris located inside of the highlighted areas.

    • Use a microfiber cloth first then, damp towel for areas that are more difficult to clean.

  3. The ball may be stuck or dirty and isn't relaying correctly. To remove or clean the ball, twist the ball cover according to the arrows (counter-clockwise).
    • The ball may be stuck or dirty and isn't relaying correctly. To remove or clean the ball, twist the ball cover according to the arrows (counter-clockwise).

  4. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Schon mal was repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  5. These are the vertical and horizontal ball sensors. These can become dirty from excessive use. Clean these with proper materials to insure cooperation.
    • These are the vertical and horizontal ball sensors. These can become dirty from excessive use. Clean these with proper materials to insure cooperation.

  6. Insert the USB Cable back into your computer.
    • Insert the USB Cable back into your computer.

  7. Examine the cord for frays or any exposed wires that may cause a bad connection.
    • Examine the cord for frays or any exposed wires that may cause a bad connection.

  8. Examine wheel for debris. The wheel can get dirty frequently which affects performance and may cause issues.
    • Examine wheel for debris. The wheel can get dirty frequently which affects performance and may cause issues.

  9. This highlights that the sensor may be dirty or broken.
    • This highlights that the sensor may be dirty or broken.

  10. The wheel button sensor may be stuck or not working. Pull the wheel out to expose it and clean it.
    • The wheel button sensor may be stuck or not working. Pull the wheel out to expose it and clean it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Adrian Capparelli

Mitglied seit: 23.10.2014

166 Reputation

1 Anleitung geschrieben

Team

Montana Tech, Team 1-4, Shirk Fall 2014 Mitglied von Montana Tech, Team 1-4, Shirk Fall 2014

MTUM-SHIRK-F14S1G4

3 Mitglieder

1 Anleitung geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 13

Insgesamt: 510