Diese Übersetzung enthält möglicherweise noch nicht die neuesten Änderungen der Original-Anleitung. Hilf mit, die Übersetzung zu aktualisieren oder sieh dir die Original-Anleitung an.
Einleitung
Hallo zusammen, in diesem Video zeige ich euch, wie ihr die PS5 auseinanderbaut und den Lüfter, inklusive Kühlkörper, vom Staub befreit. Mit der Zeit setzt sich der Kühler im Inneren der PlayStation 5 mit Staub zu und das System überhitzt. Um dieses Problem zu lösen, muss die Konsole gereinigt werden.
Was du brauchst
Einführungsvideo
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Backup PS5 if possible
-
Gracefully shutdown the PS5
-
Unplug all cables and move to a clean working area.
-
Gather required tools
-
TR8 Torx(security bit)
-
P1 Screw Driver
-
Magnetic Project Mat
-
Plastic prying tools and Spudger.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove Optical side cover
-
If the optical drive is closest to you, lift up on top left corner.
-
Clean accessible areas with a non-static brush, compressed-air, or vacuum.
-
When finished, flip over to remove PS logo side panel.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove cover by gently pulling up on corner by PS logo a sliding towards the Vertical Botton of PS5.
-
Clean area as much as possible
-
Now flip the ps5 back over to the optical bay side.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Using a spludger tool:
-
Carefully pry inlet grill from top-left to bottom right.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove Molex connection cover using flat end of plastic probe
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Using two spludgers
-
Pry either side of the fan molex connector to disconnect.
-
TR8 Bit: Remove 4 x screws
-
2x Screw w/ machine threads top-right and bottom-right (23.3mm)
-
1x Short screw with coarse threads on bottom left (11.4mm)
-
1x Long screw w/ coarse threads on top-left (31mm)
-
Remove fan cover
-
Remove fan assembly
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
If heavy accumulation of dust is present on heatsink, proceed with further disassembly.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Use P1 bit driver to remove 1 x Screw
-
Remove m.2 cover plate and set aside.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Disconnect 2x Molex connectors
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Proceeding further will void your manufacturer warranty. Proceed at your own risk!
-
Remove stick to reveal TR8 bit head screw
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
TR8 Bit: Remove 11 x screws
-
These screws vary in sizes so pay attention to where they go.
-
Remove cover.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Use spudger to depress metal clip for ribbon cable connecting from the main unit to the optical drive.
-
The optical drive can now be removed and set aside.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove 3x Ribbon Cables
-
Remove 2 x uFL Wifi
-
RW & RB
-
FW & FB
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove 41 X Torx Screws (Silver Screws)
-
Remove 1 X Torx Black Screw
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Disconnect Ribbon Cable
-
Flip over
-
Remove 2 x Torx Screws (29.4mm)
-
Remove Cover
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove Power Supply by pulling up
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Follow these steps in reverse or follow above video.
-
Um das Gerät wieder zusammenzubauen, befolge diese Anweisungen in umgekehrter Reihenfolge.
Um das Gerät wieder zusammenzubauen, befolge diese Anweisungen in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
23 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
8%
4ng3lsky hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›
7 Kommentare
Thanks! Man that was alot of screws!
Awesome video, and one that showed you how to put it back together!! much appreciated sir
This was my second time tearing down the PS5 to clean it... and it was still a very annoying process.
It was made much easier with this guide, though. Thanks for all the work you put in to making it! Much appreciated.
Thanks for tutorial. You just saved me some money