Zum Hauptinhalt wechseln

Wie man Rockbox auf einem iPod Classic installiert

  1. Wie man Rockbox auf einem iPod Classic installiert, Wie man Rockbox auf einem iPod Classic installiert: Schritt 1, Bild 1 von 1
    • Schließe dienen iPod im normalen Modus an (iTunes / Dateiübertragung).

    • Schließe iTunes vollständig, falls es sich beim Anschließen deines iPods öffnet, damit iTunes den Vorgang nicht stören kann.

    • Am Mac musst du den Rockbox Installer als root user laufen lassen.

    • Lade die Rockbox EXE-Datei unter dem folgenden Link herunter. Führe die Rockbox EXE-Datei aus und klicke in den Dialogen auf OK.

    • Lade hier die Rockbox EXE-Datei hier herunter.

    • Wenn du dich in diesem Bildschirm befindest, klicke auf "Deaktivierte Ziele anzeigen" und im Dialogfeld auf "OK".

    • Lasse dich vom Dialog nicht erschrecken ... selbst wenn bei diesem Vorgang etwas schief gehen sollte, können wir deinen iPod wiederherstellen.

  2. Wie man Rockbox auf einem iPod Classic installiert: Schritt 2, Bild 1 von 2 Wie man Rockbox auf einem iPod Classic installiert: Schritt 2, Bild 2 von 2
    • Nachdem du die deaktivierten Ziele aktiviert hast, klicke auf die Schaltfläche "Autodetect". Das Modell deines iPod sollte im obigen Menü hervorgehoben sein.

    • Nachdem du das Modell deines iPod ausgewählt hast, klicke auf OK.

  3. Wie man Rockbox auf einem iPod Classic installiert: Schritt 3, Bild 1 von 2 Wie man Rockbox auf einem iPod Classic installiert: Schritt 3, Bild 2 von 2
    • Für die nächsten Schritte werden wir alles außer dem Bootloader installieren. Wir werden uns später mit dem Bootloader befassen.

    • Aktiviere alle im blauen Kästchen ausgewählten Kästchen.

    • Nachdem du alle erforderlichen Kontrollkästchen aktiviert hast, klicke auf Installieren.

    • Trink einen Schluck oder schnapp dir einen Snack, während dieser Vorgang läuft. Es sollte nicht sehr lange dauern.

  4. Wie man Rockbox auf einem iPod Classic installiert: Schritt 4, Bild 1 von 2 Wie man Rockbox auf einem iPod Classic installiert: Schritt 4, Bild 2 von 2
    • Sobald die Installation der Firmware, Themes und Spiele abgeschlossen ist, ist es Zeit für den schwierigsten Teil ... den Bootloader.

    • Aktiviere das Kontrollkästchen Bootloader.

    • Klicke erneut auf Installieren.

    • Du musst den Anweisungen auf dem Bildschirm folgen, damit dies funktioniert. Achte genau auf die Konsole. Vergrößere das Fenster, damit du den Text leichter lesen kannst.

    • Wenn diese Meldung in der Konsole angezeigt wird, halte die MENU- und die SELECT-Taste gedrückt, bis eine Meldung in der Konsole angezeigt wird, in der du aufgefordert wirst, die Tasten loszulassen.

    • Es ist wichtig, dies schnell zu tun, da sonst die Installation fehlschlagen kann und du alles in diesem Schritt erneut ausführen musst.

    Hallo

    Select und Menü taste halten......wo sind denn diese.....danke....der martin

    martin moll - Antwort

    • Wenn dieser Vorgang erfolgreich war, wird Rockbox auf deinem iPod gestartet und eine Erfolgsmeldung auf der Konsole angezeigt.

    • Es kann sein, dass die Konsole möglicherweise unangenehm lange braucht, um dir mitzuteilen, dass die Installation erfolgreich war. Auf dem iPod läuft Rockbox aber schon einwandfrei. Es sollte trotzdem in Ordnung sein, deinen iPod zu entfernen.

    Where is the MUTE button on an Ipod classic?

    Andy Smith - Antwort

Abschluss

Lass mich wissen, wenn du Probleme hast, Rockbox zu installieren. Ich versuche jede Frage in den Kommentaren zu beantworten.

20 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

[deleted]

Mitglied seit: 08/28/18

26.355 Reputation

21 Anleitungen geschrieben

15 Kommentare

Rockbox failed to install on mine. I followed every step but never got the message to press and hold select and menu for the bootloader. It said it had installed sucessfully but when it booted up I just got error -3. I put it in disc mode and deleted the software but it didn’t put it back to factory settings. Tried to install again but got the same thing except it said bootloader was already installed when I tried the last step. I’m afraid it is now bricked. :(

jdennis61 - Antwort

From my experience if you run into trouble like that youll need to detete the MBR (master boot record) then delete all partitions. Next you create a new Fat32 Partition and finally you will Format the Partition also as Fat32 all I use is AOMIE Partition Assistant and its FREE. Then Apple iTunes will detect it soon as you start your ipod and plug in to computer, will be detected as an iPod in recovery mode. From there I think you know the rest from there. I hope that helped even if a little to late for supper. Lol

Ms. Danielle Rae

Danielle Rae Goodman -

Hi,

I am running rockbox release 15e1f592D-170118 on my Ipod Classic 7th gen. Soundwise should I look for a newsest release

also would you know at which frequency and range works the Rockbox ‘‘bass’’ setting

Thanks a lot

Denis

Denis Ménard - Antwort

I tried to install Rockbox onto my iPod Classic 160GB, and I got no results , as a matter of fact; I got negative results asuch as I am not able to restore my iPod Classic in iTunes on my Mac, and I can’t listen to any of my music on the device, even though it appears as though my music is still there. Please help 911 because this is one of my favorite Apple devices of all time!

Dennis Porter - Antwort

How do i uninstall rockbox and restore my ipid?

Brant Mcgregor - Antwort

Can you put this on a 7th gen classic?

Eli Stettner - Antwort

I quite literally hit install on everything unplugged it at 99 percent because everything was done at that point then booted it up in normal iPod mode and plugged it back in and it loaded the rest of the files on to the iPod. Then proceeded to boot up Rockbox and to my amazement it was successful. Now enjoying my Rockboxed iPod because screw iTunes.

GoldRaider97 Gaming - Antwort

I have gotten as far as installing the Rockbox, themes, fonts, games installed on my ipod 6 classic with a 1TB iflash quad.

can’t get the bootloader to be ungreyed to install it, any ideas what i’m doing wrong?I’m on a macbook pro with High Sierra.

TIA

ericrobinson00 - Antwort

From what I understand from both reading and discussion with others. If you try to do that big of an install from a Mac, oddly enough the iPod/iFlash/Rockbox will generally fail. However if you can get your hands on a Windows machine you should have no issues. I know, weird huh being the iPod and Mac's are BOTH Apple!!!!

Ms. Danielle Rae

Danielle Rae Goodman -

So, do I no longer sync my ipod with itunes? And will Rockbox save all the data from itunes? The plays, the dates added, the ratings etc?

Willie - Antwort

No you shouldnt boot into Apple iOS on iPod 6 or 7 gen. In most cases youll loose everything and have to do it all over again.

Ms. Danielle Rae

Danielle Rae Goodman -

It works completely fine until I try to install the bootloader but it says Could not open Ipod: permission denied

nate young - Antwort

I’m having the same issue did you manage to fix it ??

Jose Figueroa -

I installed a cf card 1TB size, it reads only 700MB?

Any ideas

Micheal Rezq - Antwort

Rockbox has seemed to have bricked my ipod classic loaded onto Ipod but want it remove this and now just cannot restore Ipod and just get cannot detect mountpoint am afraid this software destroyed my Ipod.

chuck11940 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 55

Letzte 7 Tage: 358

Letzte 30 Tage: 1,801

Insgesamt: 53,134