How to remove and clean the Dyson DC14 filter

Einleitung

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

Was du brauchst

Schritt 1 How to remove and clean the Dyson DC14 filter

How to remove and clean the Dyson DC14 filter, How to remove and clean the Dyson DC14 filter: Schritt 1, Bild 1 von 1

The filter is located in the canister of your vacuum.

Bearbeiten

Schritt 2

How to remove and clean the Dyson DC14 filter: Schritt 2, Bild 3 von 3

Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.
Remove the yellow filter housing.

Bearbeiten

Schritt 3

Remove the blue sponge-filter from the yellow filter housing.
The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.
Clean the blue sponge-filter in cold water until the water runs clear.

Bearbeiten

Abschluss

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

17 weitere Nutzer:innen haben diese Anleitung absolviert.