Einleitung
prereq - disconnect main and display flex cable.
Was du brauchst
-
-
Switch off your phone.
-
Remove the two Pentalobe P2 screws at the bottom.
-
Remove the SIM card tray.
-
-
-
Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.
-
Carefully pry the display with its parts out of the case.
-
After you pried out the bottom end, use the opening tool to open the clamps on both sides.
-
-
-
-
Swing open the phone backwards.
-
Use a spudger to disconnect the power- and volume button flex cable.
-
-
-
Remove the two Phillips #00 screws.
-
Use tweezers to remove both metal plates.
-
-
-
Use a spudger to disconnect the interconnect, the battery and the display flex cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
