Einleitung
Use this guide to replace the motherboard in your Huawei P9 Lite.
Was du brauchst
-
-
Use an opening pick to unclip the rear cover, starting from the bottom corner.
-
Work your way around counterclockwise and carefully pry the plastic tabs open one by one.
-
-
-
Twist the opening pick to lever the back cover away and loosen it from the adhesive.
-
-
-
When the back cover is freed from the adhesive you can pop it off by hand completely.
-
-
-
Remove the nine Phillips #00 screws that secure the metal shield plate.
-
-
-
-
Use a spudger to disconnect the fingerprint sensor from the motherboard.
-
Peel the NFC antenna cable off of the metal plate.
-
-
-
Use a spudger to lift the motherboard carefully.
-
Remove the motherboard assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.