Zum Hauptinhalt wechseln
  1. Remove back cover. Remove back cover. Remove back cover.
    • Remove back cover.

  2. Remove small signal cable.
    • Remove small signal cable.

  3. Twist off those nine screws and remove the bracket. Twist off those nine screws and remove the bracket.
    • Twist off those nine screws and remove the bracket.

  4. There is adhesive under the vibration motor, so release the connector and pry up to remove the assembly. There is adhesive under the vibration motor, so release the connector and pry up to remove the assembly. There is adhesive under the vibration motor, so release the connector and pry up to remove the assembly.
    • There is adhesive under the vibration motor, so release the connector and pry up to remove the assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Sophia

Mitglied seit: 25.03.2014

43.362 Reputation

62 Anleitungen geschrieben

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 3

Insgesamt: 1,624