Zum Hauptinhalt wechseln

Einleitung

If you are experiencing shutter delay with your Huawei SnapTo G-620's camera, then the camera may need to be replaced. This guide shows you how to replace your SnapTo's camera.

  1. Pry open the back cover with your fingernail, using the divot to the lower left hand corner. Remove all fifteen 4mm Phillips J00 screws on the back panel. Using a metal spudger or your fingernail, remove the back panel.
    • Pry open the back cover with your fingernail, using the divot to the lower left hand corner.

    • Remove all fifteen 4mm Phillips J00 screws on the back panel.

    • Using a metal spudger or your fingernail, remove the back panel.

  2. Use a plastic opening tool to remove the pictured flat-top connector. Using the plastic opening tool remove the camera.
    • Use a plastic opening tool to remove the pictured flat-top connector.

    • Using the plastic opening tool remove the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Brian Omer Uzan

Mitglied seit: 28.09.2017

401 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team S2-G6, Nance Fall 2017 Mitglied von USF Tampa, Team S2-G6, Nance Fall 2017

USFT-NANCE-F17S2G6

4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 130