Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the screws shown. These screws are connected to the keyboard.
    • Remove the screws shown. These screws are connected to the keyboard.

  2. Take the spudger tool,  go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.
    • Take the spudger tool, go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Erfolgreich repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  4. Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon. Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.
    • Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon.

    • Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.

  5. Carefully unplug the highlighted part, and your fan should come straight out.
    • Carefully unplug the highlighted part, and your fan should come straight out.

  6. The section in blue is where your new fan will go.
    • The section in blue is where your new fan will go.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Aaron

Mitglied seit: 12.03.2014

134 Reputation

1 Anleitung geschrieben

Team

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 22

Insgesamt: 1,830