Zum Hauptinhalt wechseln

Einleitung

Removal/repair of the display

Ersatzteile

Keine Ersatzteile angegeben.

  1. IBM ThinkPad T42 Display Replacement, Bottom Cover: Schritt 1, Bild 1 von 1
    • Unscrew the 20 Phillips screws on the underside of the T42.

    • For ease of reassembly, keep your screws organized.

  2. IBM ThinkPad T42 Display Replacement, Rear Screws: Schritt 2, Bild 1 von 1
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

    leave these four screws alone. No need to remove them.

    fredwb - Antwort

    Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

    wbcam -

    There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

    The dark red circles are not very easy to see. How about white ones?

    mattikaki - Antwort

  3. IBM ThinkPad T42 Display Replacement, Keyboard/Trackpad Removal: Schritt 3, Bild 1 von 1
    • Flip the laptop over and open the screen.

    • The bezel and keyboard will be loose, be careful.

  4. IBM ThinkPad T42 Display Replacement, Disconnecting Ribbon Cables: Schritt 4, Bild 1 von 2 IBM ThinkPad T42 Display Replacement, Disconnecting Ribbon Cables: Schritt 4, Bild 2 von 2
    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

  5. IBM ThinkPad T42 Display Replacement, Bezel Removal: Schritt 5, Bild 1 von 2 IBM ThinkPad T42 Display Replacement, Bezel Removal: Schritt 5, Bild 2 von 2
    • Remove the plastic bezel along the edges, you may need to pry the areas circled with a spudger to remove the bezel.

  6. IBM ThinkPad T42 Display Replacement, Display Screws: Schritt 6, Bild 1 von 1
    • Unscrew the screws holding down the display.

    • Along with the one pictured in red, there is another one along the top right edge.

    could you post a pic of all the screws and where they go?

    Seth King - Antwort

  7. IBM ThinkPad T42 Display Replacement, Display and Ribbon Cable Removal: Schritt 7, Bild 1 von 1
    • Carefully unplug the display ribbon on the motherboard, then carefully lift the display free from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Austin Kidd

Mitglied seit: 21.04.2010

269 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 29-76, Johann Spring 2010 Mitglied von Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Mitglieder

30 Anleitungen geschrieben

2 Kommentare

@Seth

Just use the pic numbering left to right each of the 4 rows.

Start at the top and remove in sequence, placing each on a strip of heavy tape to keep the screws in sequence.

Place a second strip on top when finished to secure the sequence until it's time to re-assemble.

Michael G - Antwort

Very poor & sketchy guide! NO mention at all of how to handle the other wires involved in disconnecting the screen (lid) from the laptop base, eg: the wireless antenna connections and instructions like: "Unscrew the screws holding it down" are far too vague! holding WHAT down ffs!!!!

wbcam - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 2

Letzten 30 Tage: 2

Insgesamt: 12,578