Zum Hauptinhalt wechseln

IBM ThinkPad T42 Keyboard and Trackpad Replacement

Was du brauchst

  1. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Bottom cover: Schritt 1, Bild 1 von 1
    • Using a Phillips #0 screwdriver, identify and unscrew the twenty screws located on the underside of the T42.

  2. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Rear screws: Schritt 2, Bild 1 von 1
    • Unscrew the four Phillips screws located on either side of the rear of the T42 (there are two located on each end.)

  3. IBM ThinkPad T42 Keyboard and Trackpad Replacement, Keyboard and Trackpad: Schritt 3, Bild 1 von 1
    • Flip the laptop over and open the screen to access the keyboard and trackpad.

    • The keyboard and trackpad are connected to the motherboard. Before removing the keyboard and trackpad, disconnect both components from the motherboard, as shown in the following step.

    • The bezel and keyboard will be loose, be careful.

  4. IBM ThinkPad T42 Keyboard and Trackpad Replacement: Schritt 4, Bild 1 von 2 IBM ThinkPad T42 Keyboard and Trackpad Replacement: Schritt 4, Bild 2 von 2
    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

    • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Austin Kidd

Mitglied seit: 04/21/10

299 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 29-76, Johann Spring 2010 Mitglied von Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 Mitglieder

35 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 27

Insgesamt: 9,999