Einleitung

This guide shows how to remove a previously existing wireless card. Be sure you are comfortable with the palm rest and keyboard removal guides before attempting this guide. Remember to always power down the computer before attempting any installation/removal of any hardware components. Be sure to remove the AC adapter and all cables from the computer. If the computer has been on, wait several minutes before beginning the procedure to ensure all parts have cooled down.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn the computer over to see the small tab on the battery located near the top of the Thinkpad.
    • Turn the computer over to see the small tab on the battery located near the top of the Thinkpad.

    • Use your finger to slide the tab to the right to unlock the battery.

    Kommentar hinzufügen

  2. Once the tab is in the unlocked position (far right), pull the battery outwards away from the Thinkpad.
    • Once the tab is in the unlocked position (far right), pull the battery outwards away from the Thinkpad.

    • The battery is now disconnected.

    Kommentar hinzufügen

    • Using a #0 Phillips screwdriver, remove the four 17.0 mm screws.

    Kommentar hinzufügen

    • Turn the computer back over, so that the top is facing upwards.

    • Open the display to access the palm rest. Apply pressure to the sides of the palm rest so that it bends upwards in the middle. Then gently lift away from the computer.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    • Slightly lift the palm rest away from the computer.

      • The touchpad's data cable connects the palm rest to the base unit. BE CAREUL!

    • Detach the connector by pulling upwards on the white tab.

    Putting it back on should be covered too, as it’s really hard to get everything lined up. Would be nice for some tips on that. Took me and other experienced guy 45 minutes to get the thing back on, and have all the screws seat!

    Glenn - Antwort

    • Turn the Thinkpad over so you can see the bottom.

    • Using a #0 Phillips screwdriver, remove the 17.0 mm screw.

    Kommentar hinzufügen

    • First, flip the laptop back over. Next, use your fingers to pry the keyboard upwards slightly.

    • Lift the keyboard until you are able to see the wire connection

    Kommentar hinzufügen

    • Pull upwards on the connector to disconnect the keyboard.

    • The keyboard is now disconnected.

    Kommentar hinzufügen

    • Using a #0 Phillips screwdriver, remove the two 10.5 mm screws.

    Kommentar hinzufügen

    • Disconnect the two connectors by pulling upwards on the base of the grey and black cables.

    Kommentar hinzufügen

    • Grasp the sides of the card and pull perpendicular to the slot.

    • The wireless card is now disconnected.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Cody Kratochvil

Mitglied seit 11.01.2013

406 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 7-9, Maness Winter 2013 Mitglied von Cal Poly, Team 7-9, Maness Winter 2013

CPSU-MANESS-W13S7G9

4 Mitglieder

16 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 4

Letzte 30 Tage: 42

Insgesamt: 3,864