Zum Hauptinhalt wechseln

India Mark III Access Door Replacement

Was du brauchst

  1. India Mark III Access Door Replacement, Access Door: Schritt 1, Bild 1 von 2 India Mark III Access Door Replacement, Access Door: Schritt 1, Bild 2 von 2
    • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    • Remove the hex head bolt from the top of the access door on the pump head.

    • On reassembly, this bolt should be hand-tight.

  2. India Mark III Access Door Replacement: Schritt 2, Bild 1 von 3 India Mark III Access Door Replacement: Schritt 2, Bild 2 von 3 India Mark III Access Door Replacement: Schritt 2, Bild 3 von 3
    • Pull the access door straight up off the pump head.

    • Store the access door in a sanitary place to prevent contamination.

  3. India Mark III Access Door Replacement: Schritt 3, Bild 1 von 2 India Mark III Access Door Replacement: Schritt 3, Bild 2 von 2
    • The access door has a tongue that fits into the base of the pump head.

    • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

iFixit Mitglied von iFixit

Staff

135 Mitglieder

16.732 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 214