Zum Hauptinhalt wechseln

Einleitung

If the buttons on the device are not responsive, you may need to replace them, and this guide will show you how to do that, but does involve some soldering.

  1. Lift the four adhesive covers on each of the corners on the bottom of the clock using a plastic opening tool or your fingernail. Lift the four adhesive covers on each of the corners on the bottom of the clock using a plastic opening tool or your fingernail.
    • Lift the four adhesive covers on each of the corners on the bottom of the clock using a plastic opening tool or your fingernail.

  2. On the bottom of the clock, use your fingernail to push the battery cover to the right. Lift the battery cover up and to the right to reveal the batteries. Lift the battery cover up and to the right to reveal the batteries.
    • On the bottom of the clock, use your fingernail to push the battery cover to the right.

    • Lift the battery cover up and to the right to reveal the batteries.

  3. Remove the two AA batteries by pressing the end opposite of the spring towards that spring and lifting up.
    • Remove the two AA batteries by pressing the end opposite of the spring towards that spring and lifting up.

    • Once the batteries are removed, close the cover.

  4. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  5. Use a long Phillips #2 screwdriver to unscrew all six 10mm Phillips screws inside the bottom of the clock.
    • Use a long Phillips #2 screwdriver to unscrew all six 10mm Phillips screws inside the bottom of the clock.

    • Turn over the device to allow the screws to fall out, being careful to catch them so that you do not lose any.

    • The screws may not come out of the bottom of the clock. As long as you have unscrewed them, the clock can still be opened.

  6. Turn the clock back over. Lift the top off of the clock by gripping the back of the iPhone dock and pulling straight up. Lift the top off of the clock by gripping the back of the iPhone dock and pulling straight up.
    • Turn the clock back over.

    • Lift the top off of the clock by gripping the back of the iPhone dock and pulling straight up.

  7. Using the Phillips #2 screwdriver, unscrew the seven 6mm Phillips screws on the circuit board that is attached to the top of the case.
    • Using the Phillips #2 screwdriver, unscrew the seven 6mm Phillips screws on the circuit board that is attached to the top of the case.

  8. Lift the circuit board from the device.
    • Lift the circuit board from the device.

  9. Detach the circuit board from the rest of the clock by gripping the sides of the white ribbon cable connector on the left-hand side of the board and pulling it straight off. You may need to use tweezers to grip the connector. Detach the circuit board from the rest of the clock by gripping the sides of the white ribbon cable connector on the left-hand side of the board and pulling it straight off. You may need to use tweezers to grip the connector.
    • Detach the circuit board from the rest of the clock by gripping the sides of the white ribbon cable connector on the left-hand side of the board and pulling it straight off. You may need to use tweezers to grip the connector.

  10. Use this soldering guide to remove and replace any buttons that were not working. The buttons will be labeled on the top of the circuit board, and you will be working with the corresponding connections on the back. The buttons will be labeled on the top of the circuit board, and you will be working with the corresponding connections on the back.
    • Use this soldering guide to remove and replace any buttons that were not working.

    • The buttons will be labeled on the top of the circuit board, and you will be working with the corresponding connections on the back.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Preston Jackson

Mitglied seit: 23.09.2015

201 Reputation

2 Anleitungen geschrieben

Team

Baylor, Team 6-9, Williams Fall 2015 Mitglied von Baylor, Team 6-9, Williams Fall 2015

BU-WILLIAMS-F15S6G9

3 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 173