Einleitung
LED Tagfahrlichter sind eine großartige Ergänzung an jedem Fahrzeug, um das Licht für die Sicht und Sicherheit zu verbessern. Einige LED Tagfahrlichter sind fahrzeugspezifisch, aber dieses Set der Philips LED Tagfahrlichter ist universell für viele Fahrzeuge passend.
Was du brauchst
-
-
Montiere die Halterung am Fahrzeug. Da diese universell ist, kannst du sie überall montieren, wo du möchtest.
-
-
-
Nachdem du die Halterung montiert hast, kannst du das LED Licht an der Halterung befestigen.
-
-
-
-
Verbinde die Kabel und lege sie bis zum Sicherungskasten.
-
Benutze Kabelbinder, um die Kabel entlang der Stoßstange zu befestigen.
-
-
-
Finde die ACC-Sicherung in deinem Sicherungskasten und berühre sie mit dem roten Kabel.
-
Du kannst die ACC-Sicherung mithilfe eines Elektro-Messgerätes prüfen, indem du das schwarze Kabel an den Minuspol der Batterie oder Masse anschließt.
-
Sobald du die ACC-Sicherung gefunden hast, entnehme diese, klemmen das rote Kabel an Flachstecker der Sicherung und setze die Sicherung wieder ein.
-
-
-
Teste, ob alles funktioniert. Nun kannst du deine neuen Philips Style LED Tagfahrlichter genießen.
-
Wie du sehen kannst, ist der Einbau nicht so kompliziert und wenn du die Schritte befolgst, hast du in kürzester Zeit neue LED Tagfahrlichter.
Wie du sehen kannst, ist der Einbau nicht so kompliziert und wenn du die Schritte befolgst, hast du in kürzester Zeit neue LED Tagfahrlichter.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
21 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›
11 Kommentare
Useful information shared. Thanks for giving us nice info. Fantastic walk through. I appreciate this post and here is my link
Useful info. Thanks
great information and pictures, just one thing, what size of fuse should I use for connection in fuse box.
UK road/MOT law states you must 60% dim or better still, make DRL’s turn off when headlights are turned on … stop advertising fake information Phillips and start stating some facts for a change
When did Philips ever make a comment on brightness? Its your responsibility to ensure you meet MOT regulations, not theirs.
AdamA -
Wot about the indicator wire
Indicator has nothing to do with it as these aren’t switchback
AdamA -
Hello. Can I wire 2 drl to this same fuse?
The wire connection directly to the ACC fuse is both unsafe and unprofessional. Using the method you describe, if the LED DRL, or a bare wire causes the fuse to blow, all ACCessories will be disabled. Also, your description doesn't ensure you are connected to the back side of the fuse, anyway. The proper connection would be a quick-tap splice to the back-side wire of the ACC fuse with a separate in-line fuse for the DRL. That way, if the DRL overloads the fuse, only the in-line fuse will be blown and the rest of the ACCessories will still have power.
Thanks for sharing this guide with us. I like this because each details are mentioned; with images. by some times our vehicle became very old; and we need to update it instead of replace the best option is cash for cars I think.
cash for cars: https://www.a1autorecycling.com.au/
#top_cash_for_cars
#cash_for_cars