Zum Hauptinhalt wechseln

Einleitung

Die Internetwiederherstellung hat eine Menge an nützlicher Anwendungen. Diese Anleitung zeigt Ihnen, wie man sie nutzt, um eine frische Kopie von macOS auf einer neuen/leeren oder fehlerhafte SSD zu installieren.

Die Internetwiederherstellung ist nur auf Apple Rechnern, welche nach 2009 hergestellt wurden, verfügbar. Wenn dein Computer von 2010 oder 2011 ist, musst du auf die neuste Version von macOS updaten, um die Internet Wiederherstellung freizuschalten.

  1. Fahre den Computer herunter.
    • Fahre den Computer herunter.

    • Wenn du MacOS mit Internet Recovery auf ein neues Laufwerk installieren willst, dann kannst du diesen Schritt überspringen.

    I thought this guide is for a completely new SSD, but in this example MacOS appears to already be running. Is the target SSD connected internally via SATA or is this guide for a USB based second SSD that will also run the OS?

    In the latter case, is the intent to run internet recovery on the new SSD and then open the machine up and connect it directly, replacing the old disk?

    orun bhuiyan - Antwort

    Sorry for the confusion, Orun! The new SSD guide shares a few steps with the general “boot to internet recovery mode” guide. If you’re installing MacOS to a new drive, you can skip this step. :)

    Taylor Dixon - Antwort

    Just to clarify, I have a late 2009 MacBook 6,1 running El Capitan and will be upgrading to a new SSD. Will Internet recovery work with this computer? The article states “after 2009”. Also I want to upgrade to High Sierra at the same time is there an option to select which OS or how does it decide?

    nathan davis - Antwort

    My current hard drive won’t read. I don’t care about saving anything on the computer at all and had planned on starting fresh. Can i just install the drive then do internet recovery mode or do i still have to have a backup usb with the os preinstaled?

    J H - Antwort

  2. Wenn der Computer ganz heruntergefahren ist, dann drücke die Einschalttaste und drücke und halte sofort danach die Tastenkombination cmd+Option+R
    • Wenn der Computer ganz heruntergefahren ist, dann drücke die Einschalttaste und drücke und halte sofort danach die Tastenkombination cmd+Option+R

    Does this option still work if using a Bluetooth keyboard?

    Chad Neumann - Antwort

    Chad, this option should still work if using a bluetooth keyboard. If you’ve paired the keyboard to the computer already, then it should connect quickly enough to register the keypresses. That said, it’s definitely less reliable than using a wired keyboard! And every bluetooth keyboard is different—one might work, and another might not. Good luck!

    Taylor Dixon -

    In my case, the SSD was completely new, and the only way I got internet recovery to work was to press Cmd+Opt+Shift+R, which installs the macOS version which came with my Mac (a Late 2012 21.5’’ iMac).

    Adrià - Antwort

    If you have a PC/Windows keyboard plugged in, then use Window+Alt+R for youngest compatible Mac-OS download.

    Ian Kjos - Antwort

    Thanks for the tips! The BT keyboard didn’t work so I used a handy Windows one.

    lucas -

    MacBook 2009 A1342 DOES NOT WORK, it always shows the ‘folder’ with a ? inside and there is nothing i can do. +, i already bought a copy of Lion 10.7 on app store but cant access it either HELP PLEASE ;-)

    Simon Saint-Pierre - Antwort

    Mine shows the same thing a folder with a ?, I couldn’t copy my hard drive as it crashed and the computer wouldn’t boot up. Now I’m starting with a brand new ssd I need to know how to or what to do.

    sweetbrandigirl2004 -

    On my MBP mid-2012, the Cmd+Opt+Shift+R worked for me too with a brand new SSD. Thx Adria!

    cat. - Antwort

    Oui pour moi aussi, avec mon MBP 13" mi 2012...

    Mickael Cambray -

    I have the A1224 and i can’t get to that back screen, I’ve tried com+opt+R and also opt+com+shift+R. It just go straight to log in screen. Any ideas that might help me get there?

    Art - Antwort

    I have MacBook A1280, I have tried all the keys combination but none is working. Keyboard perfectly working on pc but can't access Mac os partition.

    Michael Deborn - Antwort

  3. Wenn eine sich drehende Weltkugel erscheint, kannst du die Tasten loslassen. Während des Starts von Internet Recovery dreht sich die Weltkugel weiter. Wenn du kein Netzwerkkabel benutzt, wird die Frage choose Network (wähle Netzwerk) erscheinen. In diesem Menü kannst du dein Wi-Fi Netzwerk einstellen.
    • Wenn eine sich drehende Weltkugel erscheint, kannst du die Tasten loslassen.

    • Während des Starts von Internet Recovery dreht sich die Weltkugel weiter. Wenn du kein Netzwerkkabel benutzt, wird die Frage choose Network (wähle Netzwerk) erscheinen. In diesem Menü kannst du dein Wi-Fi Netzwerk einstellen.

    when i want to input wifi password the keyboard is not working

    pika - Antwort

    Mine just gets stuck at WiFi connection…

    Kelly Cairns - Antwort

    Hi.

    In this step choosing the network I can't type my password to get my connexion.

    It shows me locked.

    Thanks

    Francisco

    Francisco Hernandez - Antwort

    Hi,

    In this step after connecting to WIFI it will be there forever no progress. If I click on another network it’s getting error’ed out with a globe and exclamation mark in it and error is “apple.com/support -1005 F”.

    Please assist me with some information on how to overcome this phase.

    Raghu.

    raghuvaran45.rv - Antwort

    Hi

    did you fixed it?

    i had same problume can you help me

    thank you

    vazisda -

    -3511 F Eror , whats does it means?

    Shuhrat Safarov - Antwort

    Mine is stuck flashing a folder with a question mark on it. Now what?

    lauren borkowski - Antwort

    cant get passed folder with ? mark inside PLS HELPà

    Simon Saint-Pierre - Antwort

    Even if your keyboard is AZERTY, write your password as using a QWERTY one. Just did it now.

    You're welcome ;)

    Nicolas Vaché - Antwort

    thank you sooooo much

    Geraldine Portal -

    I can’t get passed this… entered WiFi password and it just spins forever trying to login…

    Tom Baker - Antwort

    Same to me… did you fix it?

    Fritz Denner -

    Cela ne se connecte pas alors que le code est bon, comment faire ???

    coraline.mauna - Antwort

    Bonjour, je rentre mon mot de passe wifi, mais cela me refuse l’accès ?

    Ebrard Alexis - Antwort

    faite attention si vous êtes français ou autre et que votre clavier est en azerty, car moi j’ai finalement compris que dans le ordi c’était en qwerty voilà pourquoi il n’acceptait pas le bon mot de passe

    Marine Leclaire - Antwort

    After connecting to the network, globe keeps spinning, no progress bar appears underneath. Please advice how to proceed. Thanks

    miguelcruden - Antwort

    After inputting the WiFi password it gets stuck on the revolving globe showing 24:00 for ever. What might be the problem and how to fix this issue? please help!

    Srinivasa Rao Buddha - Antwort

    Solution: You need to set your DNS-server to 8.8.8.8 at your router.

    Pavel Veter - Antwort

    If you are in Malaysia and using Time Internet, this will not work. I used my mobile phone (Maxis) and a hotspot to get around the problem. Not sure if its the way the router is configured with my Time connection.

    james_abela - Antwort

  4. Wenn die Netzwerkverbindung hergestellt ist, wird unter der sich drehenden Weltkugel ein Fortschrittsbalken gezeigt.
    • Wenn die Netzwerkverbindung hergestellt ist, wird unter der sich drehenden Weltkugel ein Fortschrittsbalken gezeigt.

    Coloco la clave wi fi la reconoce pero no me carga nada, se queda conectado pero sin cargar nada

    federicorabanez - Antwort

    de que año es la maquina? Podría ser que la red no tiene conexión? Tal vez pueda probarlo con una conexión por cable.

    Taylor Dixon -

    Coloco la clave wi fi, y la reconoce pero el globo continua rotando hasta que se detiene y muestra error casi que indefinidamente. Algunas veces se congela y muestra error 2002F… no se que hacer

    Luis Hartmann - Antwort

    Hi, what if nothing happens once a connection is established? It just connects to the wifi and then goes back to previous page

    Allie Wilson - Antwort

    Hi

    I get the spinning globe and progress bar, then it goes to grey screen with apple logo and spinning loading icon then just goes to grey screen :( 2011 macbook pro.

    Plz help.

    morgan phone - Antwort

    It happened the same to me! Could you find a solution? Thanks

    Christian Cinetto -

  5. Wenn Internet Recovery geladen ist, dann siehst du die macOS Recovery Auswahl.
    • Wenn Internet Recovery geladen ist, dann siehst du die macOS Recovery Auswahl.

    After I entered password and loaded up internet recovery a Question Mark appears and flashing. What do I do next?

    Dennis Fessler - Antwort

    Never mind. When I tried a second time it went to the Disk Utility. I was able to complete the process.

    Dennis Fessler - Antwort

    Quanto tempo ci mette di solito a ricaricarsi Internet Recovery ???

    Betty Bi - Antwort

    Apple und die Time Maschine die alles kaputt macht. Statt Itunes hätten sie lieber die Time Maschine raus nehmen sollen aus Catalina Betriebssystem Apple

    Planet der Giganten - Antwort

    mi Mac lleva más de una hora y está hasta la mitad de la barra

    Matías Fonseca५ప - Antwort

    A mi me carga hasta la mitad luego se reinicia,mi máquina tiene el problema que se reinicia constantemente pero me deja acceder al modo seguro

    asesino97ful - Antwort

    Can I backup data from internet recovery to an external drive before reinstalling operating system?

    Sara - Antwort

    So, if I have a time machine backup, I chose that? I am replacing my SSD and going from the stock unit to the 1G.

    acm332 - Antwort

    Bonjour

    Merci pour votre article.

    J’ai une question à laquelle je n’ai trouvé aucune réponse. Comment désactiver la mise en veille lors d’une clean install? Je dois rester constamment rester devant l’écran pour éviter une perte de connexion et un temps d’installation plus long…

    Layanah - Antwort

    I tried. It it didn’t go beyond globe and I tried for couple of hours. Pls advise

    San D - Antwort

    Saludos. Al entrar el password pasan unos minutos y se apaga. Que puedo hacer?

    Melissa - Antwort

  6. Bevor du macOS auf dem neuen Laufwerk installieren kannst, musst du die SSD formatieren, sodass das Installationsprogramm diese erkennt. Öffne das Festplattendienstprogramm aus dem Wiederherstellungsmenü, wähle deine Festplatte aus und drücke auf Löschen oben im Fenster. Gib einen Namen für das Laufwerk ein und stelle sicher, dass das Format auf MacOS Extended (Journaled) oder APFS gestellt ist. Sollte dort eine "Schema" Option sein, stelle diese auf GUID-Partitionstabelle.
    • Bevor du macOS auf dem neuen Laufwerk installieren kannst, musst du die SSD formatieren, sodass das Installationsprogramm diese erkennt.

    • Öffne das Festplattendienstprogramm aus dem Wiederherstellungsmenü, wähle deine Festplatte aus und drücke auf Löschen oben im Fenster.

    • Gib einen Namen für das Laufwerk ein und stelle sicher, dass das Format auf MacOS Extended (Journaled) oder APFS gestellt ist. Sollte dort eine "Schema" Option sein, stelle diese auf GUID-Partitionstabelle.

    • Wenn dir das Laufwerk nicht angezeigt wird, stelle sicher, dass Alle Geräte anzeigen im Ansicht Menü ausgewählt ist.

    • Sobald das neue Laufwerk formatiert ist, drücke Command (CMD) und Q, um das Festplattendienstprogramm zu verlassen und ins Wiederherstellungsmenü zurückzukehren.

    Bought the OWC recommended drive from fixit (for 2012 Macbook air) and it was pre-formatted—so was able to move right on to restoring from time machine backup — worked great!

    David Kittlesen - Antwort

    When can I use Time Machine to restore my data. Can I use it in this step or I have to install MacOS first, then use time machine?

    ahmad albulihy - Antwort

    Ahmad, I was under the impression that you needed to install MacOS before you can restore a time machine backup. That said, now that you ask I am not sure! It could be possible to restore your data and the OS with Time Machine. If you already have a TM backup at this step, give that a try and let me know how it goes.

    Taylor Dixon -

    I’m upgrading to a SSD on my 2011 iMac, running MacOS High Sierra. Updating to Catalina is prevented by the age of the computer.

    Should I choose APFS as the format for the new SSD, rather than Mac OS Extended (Journaled)?

    It appears to be compatible with High Sierra, and some quick research indicates that APFS is meant to be optimised for flash based storage like an SSD.

    Andy Waller - Antwort

    I think I’ve answered my own question. After futher reading of this article. I’m going to stick with MacOS Extended (Journalled) to ensure that I maintain compatibility with my existing Time Machine backups to the new drive. Its also mentioned that during installation of High Sierra, it will decide which disk format is more appropriate automatically.

    It would certainly be interesting to see how much faster APFS is for SSDs.

    Andy Waller -

    I bought the recommended OWC SSD, but mine isn’t recognized by my 2015 (early) MacBook Air 13”. I installed the new drive into an OWC Envoy Pro, with the intent of cloning the original drive onto the new drive, then installing the new drive into the computer, and sticking the original drive into the Envoy Pro. Is this what I’m doing wrong, should I just install the new drive into the computer, and move the original drive into the Envoy Pro?

    Robb M - Antwort

    UPDATE: In response to my question - yes, I was doing it wrong. I just installed the new drive into my MacBook Air, and used Internet recovery to format the new SSD. It worked great.

    I differed, though, from the instructions here. The article recommends to use internet recovery to install the OS, and then use super duper to replicate the original (cloned) drive onto the new drive. Except when I went to install the OS using Internet Recovery, it was going to install Catalina, which I don’t want to do. (Catalina doesn’t support Aperture, which is my favorite Apple application). So instead of using internet recover for that, I used Utilities to restore the original drive onto the new drive. It worked perfectly.

    Robb M -

    I got a problem, says Operation failed. The volume couldn’t be unmounted because it is in use by the process 637(hextcache)

    Couldn’t unmount disk.:(-69888)

    Karnasc - Antwort

    I can’t see the new drive, and I don’t have the View section of the menu bar… I am stuck here now

    Alfonzo Altamar Pereira - Antwort

  7. Zurück im Wiederherstellungsmenü, wähle MacOS installieren.
    • Zurück im Wiederherstellungsmenü, wähle MacOS installieren.

    Can I choose which OS version to install at this point? I will want to install Mojave, but since there’s a newer OS (Catalina) out now will that version be installed without giving me a chance to choose?

    Lee Wolf - Antwort

    Lee, unfortunately I do not think this interface will let you install older versions of macOS—it just automatically grabs the newest version. If you want to install Mojave, you’ll have to make a USB installer!

    Taylor Dixon -

    When trying to install os x, itsays this disk is locked. Is there away to unlock it?

    Anthony Ford - Antwort

    I cannot reinstall Monterey. It says the selected volume is not large enough to install on. A minimum of 27.44 is required. How can I solve this? Thank you.

    JEO - Antwort

  8. Folge nun den Anweisungen, um MacOS zu installieren. Wähle dabei das neu formatierte Laufwerk als Ziel für die installation aus. Folge nun den Anweisungen, um MacOS zu installieren. Wähle dabei das neu formatierte Laufwerk als Ziel für die installation aus.
    • Folge nun den Anweisungen, um MacOS zu installieren. Wähle dabei das neu formatierte Laufwerk als Ziel für die installation aus.

    i am getting a pop up.. ‘‘the request to the recovery service is timed out’’ can you please suggest the possible solution here?

    Akshay Bhadoriya - Antwort

    are you using wifi or ethernet? if wifi, perhaps it’s not connecting

    Ralph R Aguilar -

    Hi, I have a 2009 iMac that I have just upgraded the HDD to SSD. I have deleted all the info I had on my old HDD, so I cannot clone or anything. I have followed the steps above but on my last step it asks me for the apple ID and password. Once I insert them it directly says the pass is wrong. But because of the 2FA it passes the check to my iPad before approving the login. I don’t have any other Mac Device around, only Windows devices. With the TransMac and an *.dmg image of the 10.8 Mac X version I have made a bootable stick drive. It sees the removable drive, It seems to boot from it but it doesn’t work. Please help me!

    Danut Gabriel - Antwort

    Ici, Mavericks pour moi...

    Mickael Cambray - Antwort

Abschluss

Dein Computer startet möglicherweise während der Installation von macOS mehrfach neu. Sobald die Installation abgeschlossen ist, kannst du den Migrations Assistanten nutzen, um dein Daten von einem alten Laufwerk auf das neue zu übertragen.

152 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer*innen:

en de

100%

Diese Übersetzer*innen helfen uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

Taylor Dixon

Mitglied seit: 26.06.2018

59.141 Reputation

94 Anleitungen geschrieben

Team

Teardown Team Mitglied von Teardown Team

Community

2 Mitglieder

2.015 Anleitungen geschrieben

30 Kommentare

Perfect, it is soooooo easy

Cheers

Michael

Michael Clark - Antwort

Super easy

just be super careful with the pentalobe screws, easy to cam out and strip the heads

be sure driver is engaged and apply more down force then you would think before turning

igolten - Antwort

Hi there, will this work when upgrading an Early 2011 Macbook Pro with a new SSD and RAM? I don’t want to keep or clone any data that I currently have on the computer. I just want to do a clean install of MacOS without transferring over any old files. Thank you!

Fiona B. - Antwort

Fiona, the Early 2011 MacBook Pros didn’t ship with internet recovery, but as long as it had a recent-ish version of MacOS before the SSD upgrade the firmware should have updated, which enables internet recovery! This is a great method for installing a fresh copy of MacOS to a new SSD.

Taylor Dixon -

Hello. Thank you for the article Taylor. I use a MBP 9,2 and wish to replace my ageing 500GB HDD with 500GB SSD and undergo a clean install of macOS. I’ll follow this article and install by the Internet Recovery method. I have a Time Machine backup, from which I want to restore only certain files and folders pertaining to my studies and work. I also want to restore only Keychain. Can you advise me regarding these or direct me by providing helpful links? Thank you.

Rohit Sorkhel - Antwort

My situation:

(a) Running Mojave on early 2015 MBP, original SSD

(b) Want to upgrade SSD to 1TB

I was planning to:

(1) replacing the SSD,

(2) install Catalina on new SSD from internet using this guide, and

(c) then restore my other apps and user data from my Time Machine backup.

Would that work or should I anticipate some hiccups, especially with step (c). Also my Time Machine backups can they still be written to the same network location as my current location?

Sriram Karra - Antwort

Last time I upgraded a Mac HD with SSD I lost the ability to continue to upgrade the OS, so that Mac is stuck in the past. I resorted to an older Mac that has latest OS but now hard drive is failing there. If I do this upgrade, will I again lose the ability to upgrade to latest OS (and maybe even end up going backwards from the current one (10.15.7) ?

Benjamin Huygir - Antwort

I could not reinstall OS vis internet recovery - MacBook Pro 13” mid 2010. I tried all three ways in internet recovery but had no prevail. Any suggestion will be appreciated

Prince Ren - Antwort

Super, merci beaucoup.

d.balkwill - Antwort

I put in new hard drive, pressed the power button and held down the option- command- R buttons and a file with a question Mark has popped up. Now what?

lauren borkowski - Antwort

Is it work on Hackintosh catalina?

midhilaj m - Antwort

Hey, does this works nowadays in 2021 with a Vintage Mid 2010 iMac 27”. I heard that given the model becomes vintage by Apple, there is no more support, and that includes the Internet Recovery mode. Is that truth? Are there any other way to install a fresh copy of the last supported OS version for this mac (High Sierra) ? I don’t know but maybe a bootable pen drive?

Juan Pablo González - Antwort

I keep getting “can’t download the additional components needed to install Mac Os X.” Please advise

Mayra Terrones - Antwort

Great instructions! I followed them but my issue is that my external backup is for High Sierra but my Mac base offers Lion as my option. After selecting a restore point on the external SSD and transferring the data all I have is Google chrome that isn’t working and none of the apps appear on my screen. Did I miss a step?

Larry Womac - Antwort

I been trying to install it, but it keep returning to the installation process, it seems like a infinite loop at the installation.

What should I do to finish the installation please.

My macPro Late 2013 retina A1502, I was using high sierra before, my ssd has broken in 2017, since then I was using the external HD.

Vagner Pereira - Antwort

Tried to install in my 2010 MBP

it won’t let me format the disk so it can be read. help !? Please

jose caro - Antwort

I used this guide to successfully install MacOS on a new SSD, as a first step in replacing my Mini’s HD, by putting the new SSD in the enclosure and connecting it with the USB cord to the Mini. Up to that point, I agree with the other commenters that the guide is very helpful.

What this guide fails to mention, though, is that once the OS is installed on the new new SSD, the computer will reboot, then start the routine to initialize a new computer, presumably because it’s rebooting using the new drive’s OS, which triggers that process. To get around this, I had to shut down the computer, unplug the SSD’s USB cord, then restart the Mini from its original HD.

Mentioning this would be a helpful addition to the guide, so people don’t panic when they see the menu for setting up a new Mac.

Scott Exo - Antwort

taylor my dude you’re the best.

nursema karabay - Antwort

I have a MacPro flashed from 4.1 to 5.1 It had disc recovery partitions but has somehow lost them. How do I put them back?

rdmahon - Antwort

I’ve got a late 2014 iMac 27” that has failed so spectacularly that it appears the moment it tries in any way to access the internal storage it crashes and immediately reboots. The fusion drive seems to have gotten progressively worse, as I was originally able to restore to and boot from an external driveThis means that I can no longer use the regular or internet recovery modes, and it won’t boot to an external drive either. Thunderbolt target disk mode works, except it crashes my other Mac as soon as I try to access the internal drive! I assume replacing both parts of the fusion drive will fix the problem, but I’d like confirmation that there’s no other likely explanation. I wish I knew whether it was the SSD or the HD that has failed, but I’m not about to open the iMac twice to find out - it makes more sense to convert it 100% to SSD.

timpetus - Antwort

this is useless literally the ssd is in and the erase button is grayed out tried all of the solutions but still doesnt work and left with a macbook that just has a question mark folder flashing unable to use

Alex Ceniccola - Antwort

THIS MIGHT HELP SOME PEOPLE!! This is for everyone how has the problem that after installing the new ssd card and then when they are in internet recovery mode that you can’t get a internet connection and it goes back to the same page and wants you to choose a network again.

I bought the OWC Aura Pro X2 which is 960 gigabyte (1 terabyte) and had this problem, what I did was to buy a adapter so that I could use a ethernet cable as internet connection instead.

I bought Apples Thunderbolt-to-Gigabit Ethernet-adapter which solved the problem and got me through to the internet recovery menu with time machine backup, disk utility exc.

Now everything is working great. :)

anton_fest - Antwort

used remote recovery to restore time machine backup on to a new external ssd drive. Seemed to work ok BUT I can NOT load off new ssd. Restart always automatically returns to old Macintosh HD in the iMac. Tried to use preferences to change startup drive BUT new ssd just shows up in light grey and I cannot force system to use it as startup drive. Any ideas?

Ken - Antwort

thank you very much for this gudie. i would not have done it without. runs very smooth with ssd.

generally very happy with ifixit guides, e.g.battery change on iphones.

thank you!

H. M - Antwort

Please help! I have an early 2009 iMac and upgraded to an SSD. But I’m pretty sure these models don’t have I fermer recovery? What do?

Nicholas Landsman - Antwort

I'm following the instructions but after installing MACOS, I get a message telling me to to to apple support. Any ideas?

James Botterill - Antwort

Some changes since this guide was written:

1] After power on, wait until you hear the chime, then IMMEDIATELY hold down opt-cmd-R. Too slow, you get a flashing folder with a question mark in the middle. Hold power key 5 secs to power off and start again.

2] I did not get select network dialog, but the WiFi icon was in the upper right menu bar. I used this to select my wifi network.

3] Disk Utility looks different for Monterey. The sidebar includes the recovery volume and defaults to it. Fortunately, Erase is greyed out for this volume. You new drive is the one listed above it.

4] Monterey is the only option for install.

YMMV

Dave Rost - Antwort

Moin, die o.g. Anleitung läuft bei mir leider nicht.Mac Mini 2019 Vierkernprocessor 3,2 Ghz.SSD 160 GB.Nach der Kugel kommt ständig das Ausrufzeichen und die omlnöse Fehlermeldung -1008 F.Habe das Gerät abgemeldet/deaktiviert.Trotzdem kommt nach der Weltkugel die Meldung dem Warndreieck und -1008.Das Gerät lief bis gestern einwandfrei ind ich wollte das neue OS aufspielen.Sicher habe ich etwas gelöscht was nicht darf.MfG E.Duw

sporvagn1949 - Antwort

Moin, Apple hat da eine Supportseite für den Fehler. Welches OS war denn bisher drauf? Und welches wolltest du installieren? Wenn du den Mac schon aus deiner iCloud-Liste gelöscht hast, ist es vielleicht die auf der Seite beschriebene Tastenkombination.

Fabian Neidhardt -

Hello, I have an Early 2011 Macbook Pro and installed a new SSD replacing the original HD with the iFix it kit: MacBook and MacBook Pro (Non-Retina) SSD Upgrade Bundle. I also installed the old HD in a case and have a cable hooking it up to my computert which is the only way, now, for me to get the OS to work. I have tried to turn on the computer without the old HD hooked up via cable, with cmd opt+R and, cmd opt SHIFT +R and a gray screen with a lock and password bar comes up. I have tried ALL passwords I have ever used and the screen will not progress to the spinning globe, just keeps asking for a password. Should I try the cmd opt+R with the old HD hooked up via cable? Thank you

Shannon Mikus - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 275

Letzten 7 Tage: 1,610

Letzten 30 Tage: 7,155

Insgesamt: 192,228