Einleitung
Hier wird der Austausch der USB und AUX Anschlüsse an der Unterseite gezeigt.
Was du brauchst
-
-
Lege das Gerät so, dass Bodenplatte zu dir zeigt.
-
Entferne die Bodenabdeckung mit einem Plastiköffnungswerkzeug oder Spudger.
-
-
-
-
Schiebe das Flachbandkabel vorsichtig aus dem Verbinder heraus.
What the name of the white ribbon and where can i buy another mine on my jbl got damaged
From where can I get the micro usb port. Its broken…or what's its called?
-
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
17 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›
15 Kommentare
Hi! I need the mini usb piece but I don´t know were I can buy it, it is not like the mobile one´s! Please help me!
Thanks
I think it is not normal, if you can find it please contact me! Thanks
need the micro-usb aswell
My jbl charge 2+ is different, after removing the plastic thing in step one there aren't any screws
[|same too at mine :-(]
Eki mako -
I tried step one and was only able to peel off the rubber base exposing the double sided tape. I do not see the cover as shown in step 2. Any help is greatly appreciated. Thanks!
Same case here… :-(
Eki mako -
Buy online 100% fit http://bit.ly/2wxk2GC
How can i make the sound come back?
where do i get the part?!?!? Torn down the speaker allrdy..
The easiest thing is to replace the whole circuit board, I’d try ebay and get something like this https://www.ebay.com/itm/JBL-CHARGE-2-SP...
Has anyone tried to install a USB-C in a JBL Charge 2+?