Was du brauchst
-
-
Remove plastic outer housing using hands or a standard spudger.
-
-
-
Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.
-
-
-
-
Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.
-
-
-
Remove the 3-pin connector from motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
15 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team S1-G2, Leahy Spring 2017 Mitglied von USF Tampa, Team S1-G2, Leahy Spring 2017
USFT-LEAHY-S17S1G2
5 Mitglieder
17 Anleitungen geschrieben
7 Kommentare
where did you source the drivers from?
i need help getting the front speakers only where would i get them???
Sir
my flip 3 Both speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts
Same Thing I have only find the driver on a French Website : https://ecommerce.mysav.eu/fr/accueil/13...
My JBL flip 3 had those ‘3 pin connectors’ non-removable. So basically I destroyed my speaker.
