Repariere deine Sachen Community Store

JBL Flip 4 Battery Replacement

Einleitung

Has the battery life of your device become unusable? Does the battery seem to refuse to charge? A faulty battery is possibly the cause of these power issues. As the battery undergoes more cycles, it holds less charge.

Was du brauchst

  1. JBL Flip 4 Battery Replacement, Shell: Schritt 1, Bild 1 von 3 JBL Flip 4 Battery Replacement, Shell: Schritt 1, Bild 2 von 3 JBL Flip 4 Battery Replacement, Shell: Schritt 1, Bild 3 von 3

    • Insert the plastic opening tool in the crack in between the cover and the rubber spine with the power button.

    • Pry off the cover, beginning with the side without the volume and bluetooth buttons.

    • When prying the cover off, the six clips (three along each side of rubber spine) that attach the cover to the speaker will make snapping sounds.

    • Watch out not to damage the clips on the buttons' side, pry open with caution.

    • Pull the cover off with your thumbs.

    Übersetzen

  2. JBL Flip 4 Battery Replacement: Schritt 2, Bild 1 von 3 JBL Flip 4 Battery Replacement: Schritt 2, Bild 2 von 3 JBL Flip 4 Battery Replacement: Schritt 2, Bild 3 von 3

    • Remove four 13 mm JIS #0 screws attaching the rubber spine to the speaker, located on both sides of the inside of the speaker.

    • Use the plastic opening tool to release the clips holding the central part of the rubber spine.

    • Pry away one end of the rubber spine with your thumbs and it should come off.

    • Prying off the spine may take some persuading.

    • The speakers are strong magnets. Keep it away from other sensitive electronics.

    Übersetzen

  4. JBL Flip 4 Battery Replacement, Battery: Schritt 3, Bild 1 von 3 JBL Flip 4 Battery Replacement, Battery: Schritt 3, Bild 2 von 3 JBL Flip 4 Battery Replacement, Battery: Schritt 3, Bild 3 von 3

    • Remove five 9mm Phillips #1 screws from the end cap opposite to the USB port.

    • Pull the end cap off with your hands.

    Übersetzen

  5. JBL Flip 4 Battery Replacement: Schritt 4, Bild 1 von 3 JBL Flip 4 Battery Replacement: Schritt 4, Bild 2 von 3 JBL Flip 4 Battery Replacement: Schritt 4, Bild 3 von 3

    • Remove two 11mm Phillips #1 screws on the battery cover.

    • Pull the battery cover off with your hands.

    Übersetzen

  6. JBL Flip 4 Battery Replacement: Schritt 5, Bild 1 von 3 JBL Flip 4 Battery Replacement: Schritt 5, Bild 2 von 3 JBL Flip 4 Battery Replacement: Schritt 5, Bild 3 von 3

    • Remove the large white plug that connects the wires from the battery to the main board using your hands.

    • Pull the battery out with your hands.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

148 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 6 anderen Mitwirkenden

Philip Pang

Mitglied seit: 10/08/18

1.249 Reputation

4 Anleitungen geschrieben

Auszeichnungen: 16

+ 13 weitere Auszeichnungen

Team

Cal Poly, Team S4-G3, White Fall 2018 Mitglied von Cal Poly, Team S4-G3, White Fall 2018

CPSU-WHITE-F18S4G3

4 Mitglieder

36 Anleitungen geschrieben

64 Kommentare

Is the battery glued into the socket like the Flip 3?

Kenneth - Antwort

No it isn’t. but the black rubber around it makes it really hard to get out. try to push it from the otherside by removing the charging-port.

Be careful not to pierce the battery

Richardo Otros -

Yes with me the battery was glued

Diter Freeman -

Be careful and don’t do like me: my old battery was bloated, so I had to push from the other side, but when doing so, I ripped the ribbon cable from the power button… now trying to find a replacement cable

jmbarroso -

Did you find the cable of the power button?

mohamed da -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 93

Letzte 7 Tage: 796

Letzte 30 Tage: 3,478

Insgesamt: 219,077