Zum Hauptinhalt wechseln

JBL Flip 4 Shell Replacement

Was du brauchst

  1. JBL Flip 4 Shell Replacement, Shell: Schritt 1, Bild 1 von 3 JBL Flip 4 Shell Replacement, Shell: Schritt 1, Bild 2 von 3 JBL Flip 4 Shell Replacement, Shell: Schritt 1, Bild 3 von 3
    • Insert the plastic opening tool in the crack in between the cover and the rubber spine with the power button.

    • Pry off the cover, beginning with the side without the volume and bluetooth buttons.

    • When prying the cover off, the six clips (three along each side of rubber spine) that attach the cover to the speaker will make snapping sounds.

    • Pull the cover off with your thumbs.

  2. JBL Flip 4 Shell Replacement: Schritt 2, Bild 1 von 3 JBL Flip 4 Shell Replacement: Schritt 2, Bild 2 von 3 JBL Flip 4 Shell Replacement: Schritt 2, Bild 3 von 3
    • Remove four 13 mm JIS #0 screws attaching the rubber spine to the speaker, located on both sides of the inside of the speaker.

    • Use the plastic opening tool to release the clips holding the central part of the rubber spine.

    • Pry away one end of the rubber spine with your thumbs and it should come off.

    • Prying off the spine may take some persuading.

    • The speakers are strong magnets. Keep it away from other sensitive electronics.

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Philip Pang

Mitglied seit: 10/08/18

1.249 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team S4-G3, White Fall 2018 Mitglied von Cal Poly, Team S4-G3, White Fall 2018

CPSU-WHITE-F18S4G3

4 Mitglieder

36 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 8

Letzte 7 Tage: 40

Letzte 30 Tage: 194

Insgesamt: 13,113