Repariere deine Sachen Community Store

JBL Tune 510BT Faceplate Replacement

Was du brauchst

  1. JBL Tune 510BT Faceplate Replacement, Faceplate: Schritt 1, Bild 1 von 2 JBL Tune 510BT Faceplate Replacement, Faceplate: Schritt 1, Bild 2 von 2

    • Firmly grasp the earmuff and pull away from the center until the lip of the earmuff is disengaged.

    • Pull the earmuff towards the center of the headphones until it is free.

    Bearbeiten

  3. JBL Tune 510BT Faceplate Replacement: Schritt 2, Bild 1 von 2 JBL Tune 510BT Faceplate Replacement: Schritt 2, Bild 2 von 2

    • Remove the three 3 mm screws using a JIS #00 screwdriver.

    Bearbeiten

  4. JBL Tune 510BT Faceplate Replacement: Schritt 3, Bild 1 von 1

    • Carefully remove the faceplate by lifting it firmly.

    • Avoid rough movements, as there is a single thin wire connecting the faceplate to the internals.

    • If the repair is for the right-side driver, be mindful of the charging port, as the faceplate has a slot there for it. Lift the opposite end and back the port out.

    • To completely detach the faceplate, desolder the wires from the connections on the motherboard.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 2 anderen Mitwirkenden

Ryan

Mitglied seit: 01/30/24

513 Reputation

4 Anleitungen geschrieben

Auszeichnungen: 8

+ 5 weitere Auszeichnungen

Team

Utah Tech University, Team 1-2, McMurrin Spring 2024 Mitglied von Utah Tech University, Team 1-2, McMurrin Spring 2024

UTAHTECH-MCMURRIN-S24S1G2

2 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 8

Letzte 30 Tage: 31

Insgesamt: 49