Einleitung

The presser foot is one of the most important parts of the sewing machine. This guide shows you how to replace different presser feet on the Juki DDL-8700.

Ersatzteile

  1. Make sure to turn off the machine before replacing the presser foot.
    • Make sure to turn off the machine before replacing the presser foot.

    • Unthread the needle.

  2. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up. Roll the hand wheel on the right side of the machine to raise the needle up.
    • Roll the hand wheel on the right side of the machine to raise the needle up.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Pull up the switch to raise the presser foot. Pull up the switch to raise the presser foot.
    • Pull up the switch to raise the presser foot.

  5. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot. Use a screwdriver to disassemble the presser foot.
    • Use a screwdriver to disassemble the presser foot.

  6. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot. Use the screwdriver to assemble the new  presser foot.
    • Use the screwdriver to assemble the new presser foot.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Ada Lee

Mitglied seit: 28.04.2017

119 Reputation

1 Anleitung geschrieben

Team

UC Davis, Team S3-G5, Coad Spring 2017 Mitglied von UC Davis, Team S3-G5, Coad Spring 2017

UCD-COAD-S17S3G5

3 Mitglieder

1 Anleitung geschrieben

I am very happy to read this post, i think it was a great post for Juki Industrial Sewing Machine Presser Foot Replacement.

quartz windows

Valley Design - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 6

Letzte 30 Tage: 22

Insgesamt: 668