Repariere deine Sachen Community Store

Katadyne Hiker Water Filter Cleaning

Einleitung

Has your Katadyne Hiker water filter become unable to pump or exceptionally hard to do so? Use this guide to regain functionality and ease of use.

Was du brauchst

  1. Katadyne Hiker Water Filter Cleaning, Katadyne Hiker Water Filter Cleaning: Schritt 1, Bild 1 von 1

    • Remove the "snap fit" guard by pulling directly away from the filter body.

    Bearbeiten

  2. Katadyne Hiker Water Filter Cleaning: Schritt 2, Bild 1 von 1

    • Remove the pump handle by pulling it completely out of the shaft.

    Bearbeiten

  3. Katadyne Hiker Water Filter Cleaning: Schritt 3, Bild 1 von 3 Katadyne Hiker Water Filter Cleaning: Schritt 3, Bild 2 von 3 Katadyne Hiker Water Filter Cleaning: Schritt 3, Bild 3 von 3

    • Use the pump handle to remove the filter cap.

    • Place the horizontal groove of the pump handle depicted in image 1 onto the filter fins.

    • Press the pump handle firmly against the fins and turn the filter counter clockwise.

    • Once unscrewed, remove the filter completely from the body.

    Bearbeiten

  5. Katadyne Hiker Water Filter Cleaning: Schritt 4, Bild 1 von 3 Katadyne Hiker Water Filter Cleaning: Schritt 4, Bild 2 von 3 Katadyne Hiker Water Filter Cleaning: Schritt 4, Bild 3 von 3

    • Only perform this step if solid particles are evident on the outside of the filter.

    • Lightly brush the entire filter with a soft bristled toothbrush under running water.

    Bearbeiten

  6. Katadyne Hiker Water Filter Cleaning: Schritt 5, Bild 1 von 1

    • Replace the filter inside the filter body and screw clockwise until tight.

    Bearbeiten

  7. Katadyne Hiker Water Filter Cleaning: Schritt 6, Bild 1 von 1

    • Lubricate the pump handle O-ring extensively with the Katadyne lubricant (sold with pump).

    Bearbeiten

  8. Katadyne Hiker Water Filter Cleaning: Schritt 7, Bild 1 von 1

    • Replace the pump handle inside the pump handle shaft.

    Bearbeiten

  9. Katadyne Hiker Water Filter Cleaning: Schritt 8, Bild 1 von 2 Katadyne Hiker Water Filter Cleaning: Schritt 8, Bild 2 von 2

    • Replace the "snap-fit" guard by pushing directly toward the filter body.

    Bearbeiten
Abschluss

If difficulty pumping persists, a new filter is required.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

Dylan Carey

Mitglied seit: 02/24/15

130 Reputation

1 Anleitung geschrieben

Auszeichnungen: 4

+1 weitere Auszeichnung

Team

Cal Poly, Team 24-6, Green Winter 2015 Mitglied von Cal Poly, Team 24-6, Green Winter 2015

CPSU-GREEN-W15S24G6

4 Mitglieder

15 Anleitungen geschrieben

Ein Kommentar

wow. this is very helpful post.

thanks for nice guide line..

plz cheak out this—https://waterfilterhub.com

Kenny J. Jackson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 6

Letzte 30 Tage: 13

Insgesamt: 687