Was du brauchst
-
-
Starting on the top side, pop the front panel frame out.
-
Remove the face-plate frame.
-
-
-
-
Use the plastic opening tool to pry open the tabs.
-
Repeat on the opposite side.
-
-
-
Use the Phillips #0 Screwdriver to remove the screws off of the metal case.
-
-
-
Carefully separate the top and bottom halves of the metal case apart.
-
Carefully pull the DVD-Drive ribbon cable from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.