Einleitung

This repair might be needed in the event of a defective LCD screen.

  1. Press the ejection  button on the lower left corner of the face plate.
    • Press the ejection button on the lower left corner of the face plate.

  2. Remove the face plate by pulling upwards and in the direction of the ejection button. Remove the face plate by pulling upwards and in the direction of the ejection button.
    • Remove the face plate by pulling upwards and in the direction of the ejection button.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Remove the three 7.5mm Phillips #1 screws.
    • Remove the three 7.5mm Phillips #1 screws.

  5. Separate the two halves of the housing by prying along the length of the device with a plastic opening tool. Separate the two halves of the housing by prying along the length of the device with a plastic opening tool.
    • Separate the two halves of the housing by prying along the length of the device with a plastic opening tool.

  6. Remove the motherboard from the housing.
    • Remove the motherboard from the housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andrew Waldon

Mitglied seit: 05.07.2018

265 Reputation

3 Anleitungen geschrieben

Team

IUPUI, Team S2-G4, Harley Summer 2018 Mitglied von IUPUI, Team S2-G4, Harley Summer 2018

IUPUI-HARLEY-SU18S2G4

3 Mitglieder

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 59