Zum Hauptinhalt wechseln
  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. Locate the battery's power ribbon. Use nylon spudger to disconnect the ribbon from the mother board.
    • Locate the battery's power ribbon.

    • Use nylon spudger to disconnect the ribbon from the mother board.

  3. Peel battery away. Battery is glued and may cause permanent damage if bent.
    • Peel battery away.

    • Battery is glued and may cause permanent damage if bent.

Abschluss

To reassemble your device, follow these instructions in reverse order.

7 weitere Nutzer haben diese Anleitung absolviert.

aaa

Mitglied seit: 06.10.2016

717 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team 2-3, Sullivan Fall 2016 Mitglied von USF Tampa, Team 2-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G3

4 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 4

Letzten 7 Tage: 26

Letzten 30 Tage: 77

Insgesamt: 5,730