Zum Hauptinhalt wechseln

Einleitung

In this guide, you will learn how to repair and replace a faulty Mode Dial for your Kodak PixPro AZ251. This may be necessary if the camera mode does not change upon turning the Mode Dial, or if the Mode Dial is loose.

  1. Kodak PixPro AZ251 Mode Dial Replacement, Batteries: Schritt 1, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement, Batteries: Schritt 1, Bild 2 von 2
    • Slide switch to open lock position.

  2. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 2, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 2, Bild 2 von 2
    • Press down on the battery cover and slide outwards to open.

  3. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 3, Bild 1 von 1
    • Remove the batteries.

  4. Kodak PixPro AZ251 Mode Dial Replacement, Back Cover: Schritt 4, Bild 1 von 3 Kodak PixPro AZ251 Mode Dial Replacement, Back Cover: Schritt 4, Bild 2 von 3 Kodak PixPro AZ251 Mode Dial Replacement, Back Cover: Schritt 4, Bild 3 von 3
    • Remove a total of four 5mm JIS #000 screws from around the camera:

    • Two screws from the right side.

    • Two screws from the left side.

  5. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 5, Bild 1 von 1
    • Remove the single 5mm Phillips #00 screw from the bottom.

  6. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 6, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 6, Bild 2 von 2
    • Open the flash module.

    • Remove the two 6mm JIS #00 screws found inside of the flash housing.

  7. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 7, Bild 1 von 3 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 7, Bild 2 von 3 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 7, Bild 3 von 3
    • Use a plastic opening tool to pry apart both halves of the camera.

    • Remove the back panel.

  8. Kodak PixPro AZ251 Mode Dial Replacement, LCD Screen: Schritt 8, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement, LCD Screen: Schritt 8, Bild 2 von 2
    • Remove these three JIS #000 screws from the control board:

    • 5mm screw.

    • 4mm screw.

    • 2mm screw.

  9. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 9, Bild 1 von 1
    • Pull the small metal switch plate to the side.

  10. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 10, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 10, Bild 2 von 2
    • Pry the LCD screen out of the metal housing plate with a plastic opening tool.

  11. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 11, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 11, Bild 2 von 2
    • Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.

    • Pull the orange cable out of the socket.

  12. Kodak PixPro AZ251 Mode Dial Replacement, Mode Dial: Schritt 12, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement, Mode Dial: Schritt 12, Bild 2 von 2
    • Remove one 4-mm screw using a J000 screwdriver from the top of the camera, near the mode dial.

  13. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 13, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 13, Bild 2 von 2
    • Using the tweezers, disconnect the orange cable connection at the top of the motherboard near the mode dial.

  14. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 14, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 14, Bild 2 von 2
    • Pull the top side cover up.

    • Rotate the top side cover to the right.

    • Rotate carefully to avoid breaking the screw attaching the top side cover to the main body of the camera.

  15. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 15, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 15, Bild 2 von 2
    • Turn the camera upside down.

    • Remove two 2mm JIS #000 screws from the metal base of the mode dial.

  16. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 16, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 16, Bild 2 von 2
    • Lift the metal base and remove the 4mm JIS #000 screw from the center of the mode dial.

  17. Kodak PixPro AZ251 Mode Dial Replacement: Schritt 17, Bild 1 von 2 Kodak PixPro AZ251 Mode Dial Replacement: Schritt 17, Bild 2 von 2
    • The mode dial should now be loose and can be easily removed from the top side cover.

    • Turn the mode dial upside down to remove the metal part inside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

USF Tampa, Team S1-G1, Cagle Spring 2018 Mitglied von USF Tampa, Team S1-G1, Cagle Spring 2018

USFT-CAGLE-S18S1G1

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 12

Insgesamt: 399