LG 32CS560 Power Supply Board Replacement

Einleitung

Replacing the power supply board inside the LG 32CS560 is a simple task to complete with the proper preparation. It involves opening up the TV, identifying the bad power supply board, removing it, adding a new power supply board, and re-assembling the TV.

Note, only replace the power supply board if you know it is the cause for your TV's problems. If the TV doesn't turn on or only the LED's on the front of the TV turn on, then the power supply is likely to blame. Use the troubleshooting guide to help you determine if you need to replace the power supply board. Also, an annoying wining noise or burn marks on the power supply board indicate it has failed.

Please have a replacement power supply board ready to go as well. The model of power supply is the LGP32-12P. You can purchase it from numerous sites such as eBay here.

Was du brauchst

Schritt 1 Prepare your LG 32CS560 for disassembly

LG 32CS560 Power Supply Board Replacement, Prepare your LG 32CS560 for disassembly: Schritt 1, Bild 1 von 2

LG 32CS560 Power Supply Board Replacement, Prepare your LG 32CS560 for disassembly: Schritt 1, Bild 2 von 2

Lay the TV face down on a soft surface
Remove the base of the TV by unscrewing the 4 base screws.
There is no base on the picture, the position of the base is marked whit the red box.

Bearbeiten

Schritt 2 Disassemble the LG32CS560

LG 32CS560 Power Supply Board Replacement, Disassemble the LG32CS560: Schritt 2, Bild 1 von 2

LG 32CS560 Power Supply Board Replacement, Disassemble the LG32CS560: Schritt 2, Bild 2 von 2

Remove the 15 Phillips head screws on the back of the TV.
Carefully remove the black plastic back panel of the TV to expose the electronics inside

Bearbeiten

Schritt 3 Disconnect & Remove the Bad Power Supply Board

LG 32CS560 Power Supply Board Replacement, Disconnect & Remove the Bad Power Supply Board: Schritt 3, Bild 1 von 3

LG 32CS560 Power Supply Board Replacement, Disconnect & Remove the Bad Power Supply Board: Schritt 3, Bild 2 von 3

LG 32CS560 Power Supply Board Replacement, Disconnect & Remove the Bad Power Supply Board: Schritt 3, Bild 3 von 3

Carefully disconnect the three wire bundles attached to the power supply.
Remove the four screws holding the power supply in place.
Now you can lift out the Power Supply Board.
If the black cylindrical component marked with yellow seems to have expanded or is leaking liquid or goo, then the power supply board is definitely bad.