Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
The screen assembly is secured to the plastic backing with clips. Insert the spudger between the screen and plastic.
-
Work your way around the device, freeing it from the connecting clips.
-
Be careful around the MicroSD, sim card, power, and volume buttons
-
Attempt to lift the tablet from the plastic frame. You may need to loosen some more clips if it is difficult to remove.
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove the battery connector marked in orange, by prying it upwards.You may need some force to do this, be careful not to damage anything.
-
Remove the other connector marked in red by gently prying up. Be sure not to rip the ribbon cables as they are very fragile.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Gently pry the battery up making sure not to bend it or snag any cables.
-
The battery is secured by two pieces of double sided tape on the left and right edges under the battery.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
18 weitere Nutzer:innen haben diese Anleitung absolviert.
Ein Kommentar
Thank you for this guide. The iFixit tool worked much better than the one that came with the replacement battery. I needed a magnifying glass to verify I lined up the ribbon cable connector but other than that it went smoothly.