Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

LG G Pad 8.3 Back Panel Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. LG G Pad 8.3 Back Panel Replacement, Back Panel: Schritt 1, Bild 1 von 2 LG G Pad 8.3 Back Panel Replacement, Back Panel: Schritt 1, Bild 2 von 2
    • With the tablet face down, pull out the SD card slot cover.

    • Using a Philips #000 screwdriver, remove the 3mm screw in the SD card slot.

  2. LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 1 von 3 LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 2 von 3 LG G Pad 8.3 Back Panel Replacement: Schritt 2, Bild 3 von 3
    • Insert a plastic opening tool in the small crevasse between the screen and the back.

    • Pry the screen away from the back panel.

    • Repeat this on each edge of the device.

    • We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

    • This requires heavy force. The back of the device is attached with adhesive. If the back panel is too hard to remove, use the iOpener.

  3. LG G Pad 8.3 Back Panel Replacement: Schritt 3, Bild 1 von 2 LG G Pad 8.3 Back Panel Replacement: Schritt 3, Bild 2 von 2
    • After using the plastic opening tools, pry open the device with your hands, removing the back panel from the screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

CSU Fullerton, Team 1-6, Bruce Fall 2015 Mitglied von CSU Fullerton, Team 1-6, Bruce Fall 2015

CSUF-BRUCE-F15S1G6

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 125