Einleitung
Hier wird der Austausch des AUX Anschlusses für Kopfhörer und Lautsprecher gezeigt.
Was du brauchst
-
-
Halte die Akkuauswurftaste gedrückt und ziehe das untere Ende des Telefons aus dem Gehäuse heraus.
-
-
-
Stecke das SIM-Karten-Auswurfwerkzeug (0,8-mm-SIM-Karten-Auswurfstift) in das kleine Loch im SIM-Kartenfach.
-
Drücke mit etwas Kraft nach innen, um das Fach auszuwerfen.
-
Ziehe das SIM-Kartenfach aus dem Telefon heraus.
-
-
-
Entferne die beiden 5,5 mm Kreuzschlitz # 00 Schrauben am unteren Ende des Telefons.
-
-
-
-
Setze das Kunststofföffnungswerkzeug in die Naht zwischen der Glasscheibe und dem Metallkörper.
-
Heble das Glas nur ein kleines bisschen hoch.
It is, i can’t seem to do it too easily either. Maybe i need to heat it up? I don’t want to damage it as it will still be used as a camera.
-
-
-
Stecke den Spudger in den nun offenen Raum zwischen Gehäuse und Bildschirm.
-
Drücke nach innen, um den Bildschirm noch weiter zu trennen.
-
Schiebe den Nylonspudger langsam über die Kante des Telefons, bis der Bildschirm aus dem Gehäuse herausspringt.
My LCD started to let loose using this way to saparate the top and bottom of the phone.
I used a guitar pick and slided it from the bottom to the top like the dude in this video: https://www.youtube.com/watch?v=XV10zyw8...
Didn’t had to use a lot of force this way, and my screen almost didn’t bend !
Yep! I did it also with this method. Wayy better and easier ;)
I found it easier to run the tool or a pick along the sides, and then sort of hinge the thing open at the top rather than running completely around the screen. It gets a little dicey where the glass starts to curve.
-
-
-
Ziehe den Bildschirm aus dem Gehäuse. Die beiden Teile sollten vollständig getrennt sein.
-
-
-
Der AUX Anschluss befindet sich oben rechts am Smartphone.
-
Hole den Anschluss vorsichtig mit den Fingern heraus.
-
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
8 weitere Nutzer:innen haben diese Anleitung absolviert.
Besonderer Dank geht an diese Übersetzer:innen:
100%
VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›
2 Kommentare
I saw a video where someone used a guitar pick as the plastic opening tool, seems safer to me. And that person also had a great idea to shove a pencil in the battery bay to apply a separating force, so that as you work the seam with a guitar pick, the the two halves will naturally want to separate.
Hi, I have two LG G5 phone. Let's call them
A & B.
So , B overheats and the battery last less than an hour. So I took the battery from A and I put it in B and I put the B battery in the A. Results: B still overheats and not the A ??? I also left the connector blocks on the batteries when I did the switching. So what could be the cause of this?