Zum Hauptinhalt wechseln

LG G5 Frontplatte

Was du brauchst

  1. LG G5 Frontplatte, Frontplatte: Schritt 1, Bild 1 von 2 LG G5 Frontplatte, Frontplatte: Schritt 1, Bild 2 von 2
    • Halte die Akkuauswurftaste gedrückt und ziehe das untere Ende des Telefons aus dem Gehäuse heraus.

  2. LG G5 Frontplatte: Schritt 2, Bild 1 von 3 LG G5 Frontplatte: Schritt 2, Bild 2 von 3 LG G5 Frontplatte: Schritt 2, Bild 3 von 3
    • Stecke das SIM-Karten-Auswurfwerkzeug (0,8-mm-SIM-Karten-Auswurfstift) in das kleine Loch im SIM-Kartenfach.

    • Drücke mit etwas Kraft nach innen, um das Fach auszuwerfen.

    • Ziehe das SIM-Kartenfach aus dem Telefon heraus.

  3. LG G5 Frontplatte: Schritt 3, Bild 1 von 2 LG G5 Frontplatte: Schritt 3, Bild 2 von 2
    • Entferne die beiden 5,5 mm Kreuzschlitz # 00 Schrauben am unteren Ende des Telefons.

  4. LG G5 Frontplatte: Schritt 4, Bild 1 von 1
    • Setze das Kunststofföffnungswerkzeug in die Naht zwischen der Glasscheibe und dem Metallkörper.

    • Heble das Glas nur ein kleines bisschen hoch.

    Holy this step is hard

    Nickstar - Antwort

    It is, i can’t seem to do it too easily either. Maybe i need to heat it up? I don’t want to damage it as it will still be used as a camera.

    Theawesomegamer2yt Gaming -

  5. LG G5 Frontplatte: Schritt 5, Bild 1 von 2 LG G5 Frontplatte: Schritt 5, Bild 2 von 2
    • Stecke den Spudger in den nun offenen Raum zwischen Gehäuse und Bildschirm.

    • Drücke nach innen, um den Bildschirm noch weiter zu trennen.

    • Schiebe den Nylonspudger langsam über die Kante des Telefons, bis der Bildschirm aus dem Gehäuse herausspringt.

    • Wenn du den Bildschirm wieder einsetzst musst du die Kanten von der Oberseite des Telefons nach unten drücken. Der Bildschirm sollte einrasten.

    My LCD started to let loose using this way to saparate the top and bottom of the phone.

    I used a guitar pick and slided it from the bottom to the top like the dude in this video: https://www.youtube.com/watch?v=XV10zyw8...

    Didn’t had to use a lot of force this way, and my screen almost didn’t bend !

    Ray Bas - Antwort

    Yep! I did it also with this method. Wayy better and easier ;)

    ronlad.garud -

    My screen cracked taking it out following ifixit method . Right when I got to the part where it starts to curve at the top. Just shattered.

    Randy - Antwort

    I found it easier to run the tool or a pick along the sides, and then sort of hinge the thing open at the top rather than running completely around the screen. It gets a little dicey where the glass starts to curve.

    Arthur Heller - Antwort

  6. LG G5 Frontplatte: Schritt 6, Bild 1 von 2 LG G5 Frontplatte: Schritt 6, Bild 2 von 2
    • Ziehe den Bildschirm aus dem Gehäuse. Die beiden Teile sollten vollständig getrennt sein.

Abschluss

Um dein Gerät wieder zusammen zu setzen folge den Schritten in umgekehrter Reihenfolge.

32 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

Team

Cal Poly, Team 18-2, Forte Fall 2016 Mitglied von Cal Poly, Team 18-2, Forte Fall 2016

CPSU-FORTE-F16S18G2

4 Mitglieder

15 Anleitungen geschrieben

4 Kommentare

quickest 50 bucks i ever made, lol. Thanks for having the guide up.

Montez Hardnett - Antwort

Love this phone... So MODULAR! Thanks for the guide.. Had to double-check when I was pulling it apart.. almost seemed too easy.

Christopher Williams - Antwort

Wow, I didn't realise this phone was so modular, reminds me of the s4. I wish more phone were like it!!

Lucas - Antwort

Busted my screen running it up the side to pry it off. Next time I'd do the two bottom sides and lift up. The tapered edge on top seems to have been the problem for me.

Randy - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 9,703