Was du brauchst
-
-
Locate the hidden screw as seen in the picture and remove the rubber covering the screw.
-
-
-
Use a guitar pick or any pry opening tool to gently lift the housing until the speaker end. There is a hidden screw that needs to be removed before the housing can be completely removed.
-
-
-
-
Gently remove the pointy rubber covering using tweezers where the speaker rests as shown in the picture.
-
-
-
Use a Philips #00 screwdriver to remove the hidden screw.
-
-
-
Remove the screw holding the speaker in place using a Philips #00 screwdriver.
-
-
-
Desolder speaker connection using a soldering iron and replace with new speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Mobile Device Repair Factory Mitglied von Mobile Device Repair Factory
Business
1 Mitglied
16 Anleitungen geschrieben
4 Kommentare
Do you know of a place to buy a replacement speaker?
Excellent instructions and thank you for your time doing this! Can you give a source for the speaker parts other than LG ?
Again thank you
BT Headphone Neckband type with Retractable Earbud (similar contruction ) :: Do you have instructions for repairing loose connection between earbud and wire for model SX-991
