Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 3 : Schritt 1, Bild 2 von 3 : Schritt 1, Bild 3 von 3
    • First, see which side speaker needs to be replaced.

    • Locate the hidden screw as shown in the picture and remove the rubber piece with tweezers.

    • Remove the screw using a Philips #00 screwdriver.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 3 : Schritt 2, Bild 2 von 3 : Schritt 2, Bild 3 von 3
    • Using a guitar pick or any opening tool, open the frame of the headset.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Using a Philips #00 screwdriver remove the screw holding the motherboard in place.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 3 : Schritt 4, Bild 2 von 3 : Schritt 4, Bild 3 von 3
    • Slightly push back on the speaker back housing so the speaker can be pushed out as seen in the pictures.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 2 : Schritt 5, Bild 2 von 2
    • Once the speaker is out of the way, the hidden screw can be removed using a Philips #00 screwdriver.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 3 : Schritt 6, Bild 2 von 3 : Schritt 6, Bild 3 von 3
    • Using a pry/opening tool, slightly lift the speaker and motherboard out of place.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 2 : Schritt 7, Bild 2 von 2
    • Use a soldering iron to desolder the speaker from the motherboard.

Ziellinie

14 weitere Nutzer:innen haben diese Anleitung absolviert.

Faizan Naveed

Mitglied seit: 04/12/17

3.294 Reputation

8 Anleitungen geschrieben

Team

Mobile Device Repair Factory Mitglied von Mobile Device Repair Factory

Business

1 Mitglied

16 Anleitungen geschrieben

8 Kommentare

Thanks for such a thorough guide! Would you happen to know where I could find replacement parts without buying whole units on ebay?

Jordan Heilman - Antwort

Your welcome! Not sure where you can buy just replacement parts at the moment. Best bet would be to buy a unit for parts on ebay or amazon.

Faizan Naveed -

I can't hear noise from my left earbud of my lg tone ultra plz tell me how can i fix this problem.few months ago my headphone were working well but after they got in the hands of my nephew accidentally first the sound become disbalance like right earbud can be louder than left one,but after time passes the sound in the left earbud comes to zero and now there is no sound coming out of left earbud ….I can't buy new headphone i would like to repaire it ….!!!

Ali Anwar - Antwort

Soak the earbuds in rubbing, isopropyl, or ethanol at 50-70% concentration for an hour. Let it dry out for an hour. The solution will remove salt and other residue from sweat, which causes one side to lose sound over time.

Tung Nguyen - Antwort

Still no info on replacement parts?

rezinkillz - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 31

Insgesamt: 16,168