Einleitung

This guide will show you how to replace the screen.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the four rubber stoppers around the main screen using a pointed-end spudger
    • Remove the four rubber stoppers around the main screen using a pointed-end spudger

  2. Use a number #00 Philips screwdriver to unscrew the four screws under the rubber stoppers
    • Use a number #00 Philips screwdriver to unscrew the four screws under the rubber stoppers

    • Use a plastic opening tool, pry the top end open

    • Whilst prying the top panel with one plastic opening tool, use a thinner iPod opening tool to slide down the gap and pry open the case

    • Free the opposite side in the same manner

    • Remove plastic screen panel to reveal internal components

    • Remove the screen board by lifting away from the phone

    • Remove speaker by prying with a spudger

    • Once screen board is pulled away, gently press out the plastic screen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nico Chiarito

Mitglied seit 21.01.2010

22 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 8-47, Regan Winter 2010 Mitglied von Cal Poly, Team 8-47, Regan Winter 2010

CPSU-REGAN-W10S8G47

5 Mitglieder

8 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,327